119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Dean "T" - Futaba Adapter
1 x 
1 x Cut tube
1 x PPS-4D Propeller
1 x Motor mount VANQUIST 48" F3A
1 x Propeller POWER-PROP 13x10
1 x 2,0x50 mm allen screwdriver
1 x 3 mm Prop Adapter M6
1 x 1000 ml sealer (DOPE)
1 x 31,0 mm propeller (rigth propeller)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x 1,5x50 mm allen screwdriver
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 290 mm 8x4 M4 shaft ship
1 x 15x7 tree blades propeller
1 x 15x7 tree blades propeller LEFT
1 x 3 mm Prop Adapter M6
1 x Propeller 3x3
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Digital weight, angle and balance meter BASIC
1 x 30 cm BEC cable (female)
1 x Extension lead 15 cm Multiplex
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Ball link M3 RPA's-UAV's
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Tube Pitot to PIXHAWK
1 x ABS tube 10.0x8.0x1000 mm
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Joint with bearing M2 22x5,5
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Circlick securite
1 x ABS tube 7.0x5.0x1000 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Extension silicon 75 cm (Futaba)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Angle support XT60 conector
1 x Vasa model Catapult
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Ball link M3 (6 uds)
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Propeller APC 13x6.5 Electric Pusher
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Suncover 100cc Red
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Propeller APC 12x8 Electric
1 x Paint gun for sprays
1 x Rubber profile 8-2 mm 2M
1 x Spray Graphit 33
1 x MYLAR film A350 (1000x500 mm)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Release wax 250ml
1 x Truck-trailer for gliders 720 x 285 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Blind nut M5 (4 pcs)
1 x Spray YELLOW Inca Lexan 150ml
1 x EasyFLY Addon
1 x Presto SF Light Filler styrene-free (420 g)
1 x Conector FUTABA Servo male (10 pcs)
1 x Connector CAN 15
1 x Gates hinge aluminium (1 pcs)
1 x Conector JR Servo male (10 pcs)
1 x "M" set
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Black smoke bombs AX-60 (5 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x 1/12 Pilot "Fighter"
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Conector BEC female (10 pcs)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 1/6 Pilot "John"
1 x 1/12 Pilot "Langley"
2,105.38EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies