119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Flybar support metal LAMA
1 x Swashplate metal LAMA
1 x Blade holder metal LAMA
1 x Shaft sleeve LAMA
1 x Receptor CORE PBR-26XS 26ch
1 x Xplorer3 anemometro
2 x T-shape holder metal LAMA
1 x 30 cm DEANS female connector
1 x Conector BEC male (10 pcs)
2 x Flat Connector 4.0 mm x 1000 mm
1 x Cabel charger transmitter GRAUPNER
1 x DPSI magnetic switch actuator (housing)
1 x 800TVL CMOS camera for FPV
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x USB Mini Camera endoscope
1 x CM-3
1 x Connector Sub-D 2+5 Female
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Vasa model Catapult
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Extinguisher CO2 - 2 Kg
1 x Rubber profile 6-2 mm 2M
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x ABS angle 3,0x3,0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CC 03
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x ABS angle 2,0x2,0x1000 mm
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Profile ABS Square 2 x 1000 mm
2 x Connector Sub-D 2+5 Male
1 x Adapter lead MPX/EC3
1 x Balsa panel 4.0x100x1000 mm
1 x 2 mm female connector (2 pcs) with safety connector
1 x CC 02
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x 2 LiPo XH>EH adapter
1 x Adapter lead MPX/XT60
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Banna gold connector 2,5 mm (M/F)
1 x BALSA leading edge 8x10x1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Conector JR Servo male (50 pcs)
1 x Charger LiPo Charger4
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x EasyFLY Addon
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Pilot "Dick" Legends Series (Slimline)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x 1/10 Pilot "Jimmy"
1 x 140 mm rods + T patellas set for direction control
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 11 mm Rubber pads (14 pcs)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Piloto Jet "Green" 1/6 Scale
1 x 140 mm rods set for direction control
1 x Carbon blade 3D 230 mm
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Ferrita 14x8x5.5 mm
1 x Xplorer1 anemometro
1 x Xplorer2 anemometro
1 x Xplorer4 anemometro
1 x Ferrita 17x10x6.5 mm
1 x Propeller APC 13x4 Electric
1 x Propeller APC 13x6.5 Electric
1 x 40 mm gas motor standoff
1 x Aluminium battery holder red
1 x Connectors banna oro 2 mm (M/F)
1 x XH female balance (7S) connector (2 pcs)
1 x Red 3m5 mm connector holder
1 x Male connector for 12 pines AWG
1 x Interruptor SPS 70v 60/120A
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x Female connector for 20 pines AWG
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x XH female balance (3S) connector (2 pcs)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x TrainerCord (master-learner)
1 x Oracover light Grey 2m
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Mini Infrared Thermomiter
1 x Carbon fiber rod 20 mmx1000 mm
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x 70 mm INO spinner (carbon imitation)
1 x 1/6 Pilot "Garry"
1 x 1/4 Pilot "Mike"
1 x USB Charger 12V DC for car
1 x Medidor ángulos y/o incidencias
1 x 1/7 Pilot "Japanese"
1 x Propeller APC 11x5.5 Electric
1 x Propeller APC 12x10 Electric
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Propeller APC 14x10 Electric
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Antenna Hole Cap V1 (Silver)
1 x resin-hardener L-385 H-385 (625 g)
1 x Hardener P-25, canister 2.5Kg
1 x Connectors banna oro 3,5 mm (M/F)
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x XH male balance (8S) connector (2 pcs)
1 x resin-hardener L-385 H-385 (1250 g)
1 x XH male balance (7S) connector (2 pcs)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x DUPLEX 2.4EX MAlti (Rev.2)
1 x AddCAP 10AS capacitors
1 x DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x Hacker X-Pro USB interface V2
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS Square 4 x 1000 mm
1 x DPSI Ampere battery backer
3,723.72EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies