119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Small Crow DLE-170M
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Premium Muffler
1 x Big Crow DLE-170M
1 x Motor DLE 200cc Std
1 x Cable S.BUS 3 salidas 100 mm
1 x Prolongador S-Bus JR/JR 20cm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Futaba Female 40 cm extension
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
2 x Extension 15 cm (Futaba)
1 x Extension lead 15 cm Multiplex
2 x Prolongador S-Bus JR/JR 10cm
2 x Extension silicon 30 cm male (Futaba)
1 x Premium servo extension 75cm
1 x Extension silicon 30 cm female (Futaba)
1 x Extension silicon 35 cm male (Futaba)
1 x Futaba male 40 cm extension
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension silicon 100 cm (Futaba)
2 x Cabel "Y" 30 cm (graupner)
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Ferrita con funda
2 x Ferrita 27x14x7 mm
1 x Ferrita 17x10x6.5 mm
1 x RH long aluminium horn (2pcs)
1 x Horn 6/35 with M3 Bearing
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Horn 5/20 with M2 Bearing
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Horn 5/15 with M2 Bearing
1 x Horn 6/20 with M3 Bearing
1 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Brass control horn M3 short for wire (2 pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Small aluminium horn gold (2pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Horn 16,5x20 mm (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x ABS Strip 1.5x4.0x1000 mm
1 x Black smoke bombs AX-60 (5 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Pilot "Anthony" (Slimline)
1 x Hot Glue Stick RED
1 x Oracover Azul Cielo 2 m
1 x Ball link M3 (6 uds)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Glow Plug Clip 1.3 Ah
1 x Brass control horn M4 long for wire (4 pcs)
1 x 20 mm carbon horn
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Extra long horn 60x30
1 x DUPLEX 2.4EX MAlti (Rev.2)
2 x Cabel "Y" 30 cm (Futaba)
1 x DUPLEX 2.4EX Central Box 320
2 x Extension 7.5 cm
1 x Premium servo extension 50cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension 100 cm (Futaba)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x 120x60 mm SLH KOVO wheel
1 x DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x Circlick securite
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 50 cm (Graupner)
1 x Cabel "Y" 15 cm
1 x Extension silicon 35 cm (Futaba)
1 x Premium servo extension 25cm
1 x Cable S.BUS 3 salidas 300 mm
1 x Extension silicon 30 cm female (Graupner)
1 x 200 mm extensión servo HITEC/JR
1 x DUPLEX 2.4EX Central Box 220
1 x Premium servo extension 100cm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Car Charger DC/DS-16
1 x Extension 90 cm (Futaba)
1 x Glases Nimbus "Black"
1 x Glases Innovation Plus
1 x Glases Nimbus
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x CC 05
1 x Interruptor RX/Batterie
1 x Extension 5 lipos JST - JST/C
1 x Prolonguer for Balancer Thunder Power 6S
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Pulley brass 4/1,5 (2 pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Pulley brass 2,5/1 (2 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x Pulley brass 5/1,5 (2 pcs)
1 x 21x14 Falcon electric carbon prop (64 g)
1 x Ferrita 14x8x5.5 mm
1 x Micro control horn T2 Ø 1
1 x TMM 2512-3S heli
1 x ESC RAY G2 R-60SB SBEC
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Horn for flap control (1 pcs)
1 x Fuel bottle 500 ccm
2 x Circlick securite
1 x Wire easy tensioner (silver)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Cable coupler M2 (10 uds)
1 x Cable coupler M2x66 (2 uds)
1 x HITEC 20 mm servo arm with ball link
1 x Servo MKS HV747
1 x Wheel 28 mm
1 x Extension silicon 75 cm (Futaba)
1 x 20x15 Falcon electric V2
1 x Carburador SAITO FA-120 4S glow
1 x DPS Switch JR/JR
1 x CYCLONE XT 6.2m ARF
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 3 LiPo XH>EH adapter
1 x BEC 3A FOXY
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 2 LiPo XH>EH adapter
1 x 30 cm BEC cable (female)
1 x Connector Sub-D 2+5 Male
1 x 20x13 Falcon electric carbon prop (64g)
1 x Bateria DJI Mini 2 2250 mAh
1 x Servos security connector (2 pcs)
1 x 25 mm carbon servo arm
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m
1 x Gear for D 200 BX
1 x Horizontal mounting servo holder
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Hitec 25 mm servo arm with M3 ball link
1 x Horns set HS-65HB/MG, 5065MG
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Servo holder for retract
1 x Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3.
1 x Futaba 20 mm servo arm
1 x Foam wheel Ø 351 mm (2 pcs)
1 x Hardener Aero EPH 161 (500 g)
1 x SWTU2 switch
1 x Receptor DUPLEX REX R9 Slim
1 x Extension silicon 25 cm (Graupner)
1 x 30 cm BEC cable (male)
1 x R6106 HF 2,4 GHz receiver
1 x Fox MDM-1 ARF 3.5m Orange
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CC 03
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Lightweight aircraft wheel, 50x18.5x3
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Teacher-student connector T12FG/FX-30
1 x WINGO 2 ARF
1 x Cabel charger transmitter GRAUPNER
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Servo Robbe FS 525 BB MG HV
12,773.86EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies