Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Long pinned hinge (6 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Small pinned hinge (12 uds)
1 x	18 mm reinforced hinge
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Large flex hinge (12 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	15 mm reinforced hinge
1 x	Miniature brass strap hinge, 1 m
1 x	Flap hinge (6 pcs)
1 x	Gates hinge
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita con funda
1 x	PIX Hawk with accesories
1 x	Tape GFK 50 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Tape GFK 25 mm
1 x	Quicklock washer 3.5 mm (10 pcs)
2 x	Spring lock washer 4.1 mm (20 pcs)
2 x	M3-M4 rubber washer (8 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Lock washer 4.3 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
3 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Support XT60 conector (2 pcs)
1 x	Support ECU Xicoy X-45
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Screw M2x6 (10 pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
2 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	SERVO DES 658 BB MG
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Astra wing Joinner (Top Model)
1 x	Ion Pro NG electric with flaps ORANGE (JP Model)
1 x	FOX 3000 mm ARF (FMS)
1 x	Battery charging cable XT60
2 x	DPSI Ampere battery backer
2 x	DPS Switch JR/JR
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	120x60 mm SLH KOVO wheel
1 x	Turbina KINGTECH K70G4
1 x	Turbine KingTech K30G Restart
1 x	KingTech Turbineoil 5L
1 x	FOD Screen K140G/K180G/K210G
1 x	Fibreglass-Spinner BS ∅155 x 200 mm
1 x	Turbina KINGTECH K120 G4
1 x	Turbine KingTech K45G4+
1 x	Battery LiFe -2100/25C-3S 9.9V
1 x	Bomba KP500V Kingtech
1 x	Kerostarter K30G
1 x	Turbina KINGTECH K55G4
1 x	Turbine KINGTECH K85 G4
1 x	KingTech K45TP G4 Turboprop
1 x	Turbine KINGTECH K100 G4
1 x	FOD Screen K45/60/70/85
1 x	Burner Plug K30/ K45
1 x	Turbina KINGTECH K320 G5
1 x	Clamp K30 G3
1 x	Suncover 100cc Red
1 x	Turbine KINGTECH K160 G4
1 x	Filter KingTech
1 x	KingTech K100TP G4+ Turboprop
1 x	KingTech Turbineoil 1L
1 x	BLUE Colored Liquid smoke for turbine 0.75 l
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Propeller 3x2
1 x	Propeller 8x4,3 SlowFlyer
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Crystal Universal RX 35.170 Ch 77
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Screw M2.5x10 (10 pcs)
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Screw M4x30 (10 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Socket Screw M2x3 mm (4 pcs)
1 x	Screw M3x8(10 pcs)
1 x	Pan Head Screw M2x6 PH
1 x	Crystal RX 35.050 Ch 65
1 x	Micro Crystal RX 35.170 Ch 77
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Crystal Universal RX 35.040 Ch 64
1 x	Crystal Universal RX 35.130 Ch 73
1 x	4 LiPo XH>EH adapter
1 x	CC 03
1 x	Double conector with JR adapter and 200 mm extension
1 x	Adapter lead MPX/EC3
1 x	Dean "T" - Futaba Adapter
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	5 LiPo XH>EH adapter
1 x	Connector Sub-D 2+5 Female

33,018.41EUR