80.90EUR

Interruptor SAFET-SWITCH 12HV Twinbatt
[MU85009]


Interruptor SAFET-SWITCH 12HV Twinbatt
MULTIPLEX SAFETY-SWITCH High Voltage (HV) switch harnesses are the ideal solution for the safety-conscious model pilot. The receiver battery (4 - 6 NiXX cells or 2S LiXX) is connected directly to the SAFETY-SWITCH circuit board. The actual switching function is carried out by reliable, high-performance FETs which are immune to vibration; they also feature very low internal resistance for ultra-low power losses.

A conventional mechanical slide-switch acts as the ON / OFF switching element; this makes it easy to see the operational status of the circuit. However, if a fault occurs in the slide-switch or its connecting leads, the electronic circuit always maintains the last active switched state (i.e. ON or OFF). This means that the receiver power supply circuit remains switched on even if the switch lead comes adrift in the air (e.g. due to vibration), i.e. the receiving system continues to function. If you use one of the TwinBatt types in conjunction with a telemetry-capable M-LINK receiver, both receiver battery voltages can be monitored at the transmitter.
The plus-points:
• Small and light, suitable for many applications
• Compatible with 2S LiXX batteries, no parts subject to wear
• Modern SMT construction for total immunity to vibration
• 6 A / 12 A continuous load capacity
• High-quality gold-plated connectors and large conductor cross-sections for maximum contact security and minimal transfer resistance

SAFETY-SWITCH 12 HV TwinBatt
Both these switch harness feature a supplementary battery backer, and can be used as the basis of a dual power supply at any time: if one battery should fail, the second pack takes over the power supply of the receiving system.

M-LINK and SAFETY-SWITCH
The SAFETY-SWITCH TwinBatt variants feature two sensor sockets designed for the voltage sensor (# 8 5400). If you activate the second measurement channel at the sensor, and connect a second sensor lead (# 8 5056), the two receiver battery voltages can be transmitted independently of each other and displayed on the transmitter’s screen.

The plus-points:
• Integrated battery backer
• Max. continuous current 12 A
• M6 high-current multi-pin receiver battery connector at the input end
• 2 UNI connecting leads (for connection to the "Batt” socket and one free servo socket at the receiver) (only # 8 5009)
• The 12 HV (M6) version also features the MULTIPLEX M6 connector system at the receiver end, allowing direct connection to MULTIPLEX RX-9 / 12 / 16-DR pro M-LINK receivers or MULTIPLEX RX-9 / 12-SYNTH DS M-PCM receivers.
• Two sensor sockets for monitoring both receiver battery voltages at the transmitter.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x LUCAS pilot ARTF
1 x Set cintas unión paracaídas 145 cm
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Dean "T" - Futaba Adapter
1 x CM-3
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Para-RC Trike "RC-Bullix"
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Paramotor BackPack XXS (without accessories)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Trike XL motor set (motor+esc+prop)
1 x Adapter lead MPX/EC3
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x JETImodel SINGLE BEC
1 x Parachute BACKUP X100
2 x Parachute PV6 for F3J
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Circlick securite
2 x CC 01
2 x Windsock Ozone L - 700 mm
1 x MPX-Dean "T" Adapter
1 x CC 02
1 x 30 cm BEC cable (female)
1 x Cabel charger transmitter GRAUPNER
1 x 4 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
2 x Para-RC Mix
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Parachute P4
1 x 3 LiPo XH>EH adapter
2 x Ventus 1:4 set of instruments
1 x L-Connector 1.5 mm x 1000 mm
2 x Profile ABS half cane 2.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Spannlack 1000 ml
2 x Plasti Dip Liquid Tape 429 ml black
1 x 1000 ml sealer (DOPE)
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Spray adhesive AEROFIX 2
1 x PIX Hawk with accesories
2 x U Profile ABS 8,0x4,0x1000 mm
1 x PARTALL® Hi-Temp Wax, 340 g
2 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
1 x Angle measurer
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Angled clevis with threaded rod M3
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x M3 black washers (4 pcs)
1 x ABS Strip 1.5x3.0x1000 mm
1 x Glases Nimbus "Black"
1 x SWTU2 switch
1 x DPSI magnetic switch actuator (housing)
1 x CC 05
2 x Wing OXY 5,0 m2
1 x Male connector for 16 pines AWG
1 x Windsock Ozone L -1200 mm
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x FX three-position switched channel, long
2 x Cabling for Fox MDM1 wings
1 x EWC6 40 cm wing connector
1 x PWC4 wing/fuselage connector for 4 servos
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Tube support Ø 6mm (10 pcs)
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Support pump Xicoy X45
1 x Adapter lead MPX/XT60
1 x DPSI Ampere battery backer
1 x Connector CAN 15
1 x PPM Encoder Module
1 x Spray EC Red 400ml
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x 
1 x Partall paste 650 g
1 x Spray YELLOW Inca Lexan 150ml
1 x Release wax 250ml
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Universal Colour Paste deep black 250 g
1 x Opale Rucksack
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x 10 mm floating pad (72 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x L-Connector 1.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cinta Goldfix 1m
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x 15 mm floating pad (30 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Blind nut M2 (10 pcs)
1 x Profile ABS half cane 3x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Tube Pitot to PIXHAWK
1 x Pulley brass 16/2 (2 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Extension 6 lipos XH > EH
1 x Male Prolonger TP 4/5S
1 x Female connector for 20 pines AWG
1 x Interruptor SPS 70v 60/120A
5,372.79EUR
Manufacturers
Manufacturer Info
MULTIPLEX
MULTIPLEX Homepage
Other products
Languages
Español English
Currencies