119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x THERMIK XL 4000 mm
1 x FOX ARF 2000 mm Red (Hacker Model)
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x VAGABOND 1500 mm ARF V2 (Red)
2 x Mini VISION "spread tow" CFK
1 x Lunak ARF 2000 mm Yellow (Hacker Model)
1 x Swift ARF 2000 mm Red (Hacker Model)
1 x Vest clothes Hispano Aviación
1 x Softshell Hispano Aviación
1 x AX-60 starters (5 pcs)
1 x 200m servo "Premium" wire (white/red/blue)
1 x White smoke canister 65 g
1 x MZ-18, 9 Channel HoTT
1 x Joint with bearing M3 22x5,5
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Truck-trailer for gliders 720 x 239 mm
1 x CC 05
1 x FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Circlick securite
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Quicklock washer 2 mm (10 pcs)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Field folding model stand
1 x Propeller balancer
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x MPX-Dean "T" Adapter
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x 3 LiPo XH>EH adapter
1 x CC 02
1 x M3-M4 rubber washer (8 pcs)
1 x Medidor ángulos y/o incidencias
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl
1 x ESC ALPHA 60A HV
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Receiver FrSKY Archer R8pro 2,4 Ghz
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Transmitter SPEKTRUM DX-9 (Only TX)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Crimping tool
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Horn with ball 40x30
1 x Starter EM Gear Power 80
1 x ORACOVER Ferrari red (2 m)
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Steering arm 16 mm Ø 4 mm
1 x Crimping tool
1 x SE Ring 250 mm (2 pcs)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Small aluminium horn blue (2pcs)
1 x 6 mm aluminium horn with patella
1 x Cable coupler M3 (10 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Cable coupler M3 (10 uds)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Horn 20x28,5 mm (2 pcs)
1 x Oracover Brown 2 m
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Conector MT-60 (pair)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Spray adhesive AEROFIX 2
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x ABS tube 6.0x4.0x1000 mm
1 x Conector BEC female (10 pcs)
1 x Conector Servo female 4 pines
1 x Conector JR Servo female (10 pcs)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Connectors banna oro 2 mm (M/F)
1 x Universal Colour Paste white 50 g
1 x ABS Strip 1.0x3.0x1000 mm
1 x Banna gold connector 2,5 mm (M/F)
1 x Blades 330mm
1 x DINO Glider ARC
1 x Round Rod 3,0x1000 mm
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Cap Hispano Aviación
1 x Glider Ka 7 Red (2540mm)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Electric starter BEE (old)
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Yellow smoke canister 140 g
1 x Connector Sub-D 2+5 Male
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Battery charging cable XT60
1 x Ventus 1:4 set of instruments
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x Turnbuckle M2,5x32/48 (2pcs)
1 x Turnbuckle M2,5x27/43 (2pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x White large kwik link (10 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x Tailwheel for 20/60 size
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Tailwheel for F3A size
10,135.31EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies