119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Oracover Azul Cielo 2 m
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x 68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Oracover Brown 2 m
1 x 12.7 mm 2:1 black termoretract tube
1 x Monokote BLANCO jet (1.8x0.65m)
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Oracover Azul 2 m
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Monokote ROJO misil (1.8x0.65m)
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Oracover Black 2 m
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Glases Ace
1 x Glases Innovation Plus
2 x Glases Nimbus "Black"
1 x Glases Flitemaster
2 x Glases Aspen
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CM-3
2 x 30 cm BEC cable (female)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TrainerCord (master-learner)
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x CC 05
2 x Circlick securite
1 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Adapter lead MPX/EC3
1 x USB HLS prog. interface
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Propeller POWER-PROP 13x9 Izda
1 x Motor A2212/13T
1 x Oracover Orange 2 m
1 x L-Connector 4.0 mm x 1000 mm
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Paramotor BackPack XXS 2
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x ABS tube 3.0x2.0x1000 mm
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Support Flush MPX Conector (6 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Male Prolonger TP 4/5S
1 x FX three-position switched channel, long
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Male connector for 6 pines AWG
2 x EWC3 100 cm wing connector
2 x JETImodel SINGLE BEC
1 x Male connector for 10 pines AWG
1 x Extension 5 lipos JST/C - JST
1 x Electronic switch JETI SP06 Opto
1 x Extension 5 lipos JST - JST/C
1 x Interruptor RX/Batterie
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x DPSI magnetic switch actuator (housing)
1 x Glases Moritz
1 x 2 LiPo XH>EH adapter
1 x APM2.6 Power module with 5.3V DC BEC
1 x Ventus 1:4 set of instruments
1 x USB interface ALTIS
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x eFuel 30A Power Supply
1 x Cabel charger transmitter GRAUPNER
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x 30 cm DEANS female connector
1 x USB Adaptor OPTronics
1 x Gyro 3-Ejes REFLEX V2 FMS
1 x Threaded coupler M3 (10 uds)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1,621.03EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies