Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » POWER6600

69.00EUR

PowerBox SparkSwitch RS
[POWER6600]

Product description
The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V ignition systems. The SparkSwitch RS enables the user to switch the ignition on and off conveniently from the transmitter. The switched state can be checked at any time using the external LED or a telemetry status message. These features of the SparkSwitch RS enhance operating safety as well as simplifying the handling of petrol engines. In an emergency - such as the failure of a throttle servo - the SparkSwitch RS can be used to stop the engine quickly.
An important feature is galvanic separation between the receiving system and the ignition system. The switching process as well as RPM feedback from the ignition unit are optically isolated from the receiver. This ensures that a fault in the ignition system shielding, or any other defect, cannot cause interference to the sensitive receiving system.
The RPM (rotational speed) monitor input can be connected directly to the Tacho output of the ignition unit - if present. If your ignition system does not include a Tacho socket, we can supply a separate sensor RPM-Probe which can be connected in parallel with the Hall sensor. The RPM data can be transferred to any of the current telemetry systems: the SparkSwitch RS automatically detects the system in use, eliminating the need for adjustments using the USB interface.
The SparkSwitch RS can be supplied in either of two variants: with or without voltage regulation. The regulated variant reliably reduces the input voltage (max. 9.0V) to 6.0V. The version without voltage regulation passes the full voltage (max. 13.0V) through.

Features
Optical separation between the receiving system and the ignition system
External LED switch status indicator
Regulated (6.0V) or pass-through output voltage
RPM monitor for all current telemetry systems
Telemetry function for PowerBox, Jeti, Futaba, Graupner, Multiplex, Spektrum, JR
Failsafe mode
Machined aluminium heat-sink
Compact, low-profile format

Technical Data
Operating voltage 4.0 to 12.6V
Current drain Power-on state 19mA
Current drain Standby 0.2μA
Maximum load current max. 2A
Output voltage 6,0V / unregulated
Signal input PWM
Dimensions 56 x 29 x 10 mm
Weight 15 g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ULTIMATUM 2.0 PRO "Joker 5N"
2,900.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
3 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	3 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	CC 05
1 x	CM-3
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (male)
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 03
3 x	JETImodel SINGLE BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
3 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Dean "T" - Futaba Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 300 mm (2 pcs)
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
2 x	Round Rod 3,0x1000 mm
3 x	Round Rod 1,0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	Round Rod 2,0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ABS Strip 1.5x8.0x1000 mm
2 x	Round Rod 1,5x1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Strip 2,5x1,25x330 mm
2 x	Round Rod 1,25x1000 mm
3 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 2,5x1000 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
3 x	Round Rod 6,0x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Strip 1,5x1,5x330 mm
2 x	Strip 3,5x1,75x330 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	Round Rod 4,0x1000 mm
2 x	SE Ring 200 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x	ABS Strip 1.5x3.0x1000 mm
1 x
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Marker ties (20 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Round Rod 5,0x1000 mm
2 x	Strip 2,0x2,0x330 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Parachute expulsion foam
1 x	Parachutist
1 x	Oracover CARBON Metalic 1 m
1 x	SPS 70V 140/280 A
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	5 LiPo XH>EH adapter
1 x	DPSI Ampere battery backer
2 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Adapter lead MPX/EC3
1 x	Extension 5 lipos JST/C - JST
3 x	Female connector JST SH 1.0mm with 10 cm wire
2 x	Double conector with JR adapter and 200 mm extension
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Servo slow down unit (0,7-14,7 sec )
1 x	SPS Remote switch actuator
2 x	SPARK Switch 7.4v
2 x	Landing gear Rocket 400
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Tape GFK 38 mm
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	GPS Expander Module
1 x	Y Cable
1 x	Spark motor OS Type F
1 x	Sparkplug NGK CM6
1 x	Gates hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	15 mm reinforced hinge
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	WingFix ULTRA Black Edition
1 x	Field folding model stand SebArt
2 x	120x60 mm SLH KOVO wheel
1 x	SIMtransmitter 6 Mode 2
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Propeller balancer
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	20x200 mm battery rings
1 x	JETImodel Addcap 1640
1 x	Female connector for 20 pines AWG
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male connector for 10 pines AWG
1 x	JETImodel DPS 40
1 x	Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
2 x	Bearings for motors hacker A50
2 x	EDGE 540-A 105" (2660 mm)
2 x	Hacker X-Pro USB interface V2
1 x	Electronic switch JETI SP06 Opto
1 x	Extension 6 lipos XH > EH
1 x	Interruptor RX/Batterie
1 x	Female connector for 16 pines AWG
1 x	DPSI magnetic switch actuator (housing)
1 x	Female connector for 10 pines AWG
2 x	EWC3 40 cm wing connector
1 x	Magnetic Interruptor MULTIPLEX
1 x	FX three-position switched channel, long
1 x	Male connector for 16 pines AWG
2 x	Male connector for 12 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Male connector for 20 pines AWG
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Extension 2/3 lipos JST/C
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
2 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	A40 Backmountset complete
1 x	Cable adapter iCharger
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Esc master MEZON 120 Lite
2 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Esc MasterBasic 70SB
1 x	Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x	A50 Motor Mount Alu complete set
1 x	Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x	Propeller 8x4 Electric
1 x	Propeller POWER-PROP 12x9
1 x	Propeller POWER-PROP 13x9
1 x	KIRA 480-43 5,2:1
1 x	Actro 32-3 Heli MAX 5mm
1 x	GPS Logger Dymond
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller POWER-PROP 10x6
1 x	Propeller electric carbon 8.5x5
1 x	Propeller POWER-PROP 11x9
1 x	KIRA 600-20 6,7:1
1 x	PYRO 600-11
1 x	PYRO 650-103 Long Axi
1 x	KIRA 400-27
1 x	Xoar Electric Beechwood Prop 20x10
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	Pins M connect Multipin connectors AWG 20-24
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG
1 x	Female connector for 12 pines AWG
1 x	wing/fuselage connector for 12 pines AWG 20-24
2 x	Connector Sub-D 2+5 Male
1 x	Multi-adapter balancer JST/C - TP
1 x	MPX-Dean "T" Adapter
1 x	Battery charging cable XT60
1 x	Adapter lead MPX/XT60
1 x	UBEC 6A KAVAN
1 x	PowerBox SparkSwitch RS
1 x	Motor B50 19 S & 6.7:1 gearbox
1 x	Xoar Electric Beechwood Prop 22x10
1 x	A60-6XS V4 28-Pole
1 x	DUPLEX 2.4EX RC Switch
1 x	DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x	EWC6 40 cm wing connector
1 x	Female connector for 6 pines AWG
1 x	4 LiPo XH>EH adapter
1 x	Circlick securite
2 x	Cabling for Fox MDM1 wings
1 x	TrainerCord (master-learner)
1 x	SPARK Switch 5.9v
1 x	USB interface ALTIS
1 x	PSC 5
1 x	Motor A60-7XS V4 28-pole kv330
1 x	Motor B40 10L + MAXON 4,4:1 Keramik
1 x	Tube mounting clips (5 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	Esc MasterBasic 55SB
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	Suncover 100cc Red
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x	A60 Motor Mount Alu complete set
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	A50 Backmountset complete
1 x	Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x	Male connector for 6 pines AWG
1 x	SLICK 360-A 104" (2640 mm)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	EWC3 100 cm wing connector
1 x	Short Switch On/Off micro
2 x	wing/fuselage connector for 3 pines AWG 20-24

13,404.78EUR