Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85085

20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Nut for mounting M2 (4 pcs) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock	Pan Head Screw M2x8 PH countersunk head temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
3 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	3 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
1 x	CM-3
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (male)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 03
3 x	JETImodel SINGLE BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Dean "T" - Futaba Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 300 mm (2 pcs)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 1,0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 1,25x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 2,5x1000 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	Round Rod 6,0x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Strip 1,5x1,5x330 mm
1 x	Strip 3,5x1,75x330 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Round Rod 4,0x1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x	ABS Strip 1.5x3.0x1000 mm
1 x
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Marker ties (20 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Round Rod 5,0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Parachute expulsion foam
1 x	Parachutist
1 x	Oracover CARBON Metalic 1 m
1 x	SPS 70V 140/280 A
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	5 LiPo XH>EH adapter
1 x	DPSI Ampere battery backer
2 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Adapter lead MPX/EC3
1 x	Extension 5 lipos JST/C - JST
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Double conector with JR adapter and 200 mm extension
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	SPS Remote switch actuator
1 x	SPARK Switch 7.4v
1 x	Landing gear Rocket 400
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Tape GFK 38 mm
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	GPS Expander Module
1 x	Y Cable
1 x	Spark motor OS Type F
1 x	Sparkplug NGK CM6
1 x	Gates hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	15 mm reinforced hinge
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	WingFix ULTRA Black Edition
1 x	Field folding model stand SebArt
1 x	120x60 mm SLH KOVO wheel
1 x	SIMtransmitter 6 Mode 2
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Propeller balancer
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	20x200 mm battery rings
1 x	JETImodel Addcap 1640
1 x	Female connector for 20 pines AWG
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male connector for 10 pines AWG
1 x	JETImodel DPS 40
1 x	Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x	Bearings for motors hacker A50
1 x	EDGE 540-A 105" (2660 mm)
1 x	Hacker X-Pro USB interface V2
1 x	Electronic switch JETI SP06 Opto
1 x	Extension 6 lipos XH > EH
1 x	Interruptor RX/Batterie
1 x	Female connector for 16 pines AWG
1 x	DPSI magnetic switch actuator (housing)
1 x	Female connector for 10 pines AWG
1 x	EWC3 40 cm wing connector
1 x	Magnetic Interruptor MULTIPLEX
1 x	FX three-position switched channel, long
1 x	Male connector for 16 pines AWG
1 x	Male connector for 12 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Male connector for 20 pines AWG
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Extension 2/3 lipos JST/C
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt

3,666.39EUR