Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85221

79.90EUR

PWC6 PowerWingConnector for 6 servos with fuselage socket
[EMCA85221]

PWC6 PowerWingConnector for 6 servos with fuselage socket

Product description and features
Easy to handle plug system for wing wiring and up to 6 servos.
Please note:
Plus and minus pole are combined for all connected consumers.
The PWC6 wing plug must be screwed between wing and fuselage. On the pin strip inside the wing the servo cables can easily be plugged and secured with the enclosed shrinking hose.
The PWC6 fuselage socket is placed inside the fuselage. On the pin strip the patch cables to the receiver can be connected. Also this plug connection can be secured with the enclosed shrinking hose.
PWC PowerWingConnector system's advantages
Reverse polarity protection
Vibration safe connection because of locking
Easy mounting due to packaging
No soldering necessary
Up to 22A permanent current
Delivery contents
1 PWC6 wing plug, 1 PWC6 fuselage socket and 2 shrinking hoses.

Notice: Plus and minus pole are combined for all connected consumers. When used with a JETI Duplex Central Box (100/200/220/400), the overcurrent protection of the servo slots is bridged.

under request

Reviews

Customers who bought this product also purchased

Turbine MAMMOTH 25.4 Kg under request	Propeller MENZ-S 20x10 under request	Connectors banna oro 2 mm (M/F) under request
Propeller MENZ-S 22x8 under request	MPS Gas-Cap-Powerswitch under request	Propeller APC 8x4 Electric under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Extractor piñones 2.3/3.2 mm
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	LOWER TOW HOOK
2 x	20 mm carbon horn
1 x	Towing hook
3 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Tow hook for tug
1 x	DYNAMOMETER S-1580
1 x	Towing hook <3m
2 x	Towing hook
2 x	Horn for flap control (1 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Adapter lead MPX/EC3
2 x	30 cm BEC cable (male)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	TrainerCord (master-learner)
1 x	5 LiPo XH>EH adapter
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Dean "T" - Futaba Adapter
1 x	CM-3
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cabel charger transmitter GRAUPNER
1 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Circlick securite
1 x	3 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	JETImodel SINGLE BEC
1 x	CC 05
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Yellow smoke canister 100 g
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Support FUEL DOT V3
1 x	Support pumb/filter Xicoy X45
1 x	Support pump Xicoy X45
1 x	Angle support XT60 conector
1 x	Horn mando small (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 13,5x16 mm (2 pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	6 mm M3 variable inclined horn
1 x	Small control horn with bearing (2 pcs)
1 x	Extra long horn 60x30
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Horn mando long (2 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
2 x	Horn with ball 40x30
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	DPS Switch JR/JR
1 x	SPARK Switch 5.9v
1 x	Short Switch On/Off micro
1 x	Selfstart electronic switch
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Opto Gas Engine Kill Switch
1 x	CC 03
1 x	SPARK Switch 7.4v
1 x	Connector Sub-D 2+5 Female
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	DPSI Ampere battery backer
1 x	2 LiPo XH>EH adapter
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	SWTU2 switch
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	PSC 6
1 x	PSC 5
1 x	CC 02
1 x	USB HLS prog. interface
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Program Card G2 RAY
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 5,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Bluetooth Adapter JET CENTRAL
1 x	Smokelance
1 x	JETCAT ADITIVO ANTIESTATIC 120ml
1 x	Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x	Jet Pipe 160N-250N (120/130 mm)
1 x	KingTech K45TP G4 Turboprop
1 x	KingTech Turbineoil 1L
1 x	Burner Plug K30/ K45
1 x	ESC PULSAR A-40
1 x	KIRA 400-34
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Telemetria XYCOY adapter
1 x	Turbine KINGTECH K85 G4
1 x	Turbina X132 H "Light Version"
1 x	Turbine KINGTECH K160 G4
1 x	GSU Kingtech
1 x	Battery LiFe -2100/25C-3S 9.9V
1 x	KingTech Turbineoil 10L
1 x	Bomba KP500V Kingtech
1 x	KingTech Turbineoil 5L
1 x	Turbina KINGTECH K65 G4+
1 x	KIRA 600-16
1 x	Esc KOSMIK 200 HV
1 x	Cinta Goldfix 1m
1 x	BLUE Colored Liquid smoke for turbine 0.75 l
1 x	KIRA 600-17
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Avia (Top Model)
1 x	ULTRA STICK 30 cc ARF
1 x	EDGE 540-A 74" (1880 mm)
1 x	5 mm M2 variable inclined horn
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	RH long aluminium horn (2pcs)

18,572.55EUR