Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox SparkSwitch RS unregulated
69.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Jet Afterburner Simulator NF-Jet2YY Set
4 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Jet Afterburner Simulator NF-Jet3 RYS
1 x	NF-3X-80 liner Kit
1 x	Jet Afterburner Simulator NF-Jet2
3 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
3 x	NF-3m Heli Kit
1 x	Propeller balancer
2 x	Surface Indicator Gauge Small
1 x	WingFix ULTRA Black Edition
2 x	Propeller balancer
1 x	Angle measurer
1 x	Bungee HLG Premium
1 x	Angle of incidence meter
1 x	Medidor ángulos y/o incidencias
1 x	Field folding model stand
1 x	Dean "T" - Futaba Adapter
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	AX-60 starters (5 pcs)
2 x	Yellow smoke canister 140 g
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Green smoke canister 140 g
2 x	Circlick securite
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	2 LiPo XH>EH adapter
1 x	Green smoke canister 100 g
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
3 x	B4-0 rocket charges (6 pcs)
1 x	BEC 3A FOXY
1 x	Remote electric ignition system
2 x	Electric rocket starters (6 pcs)
1 x	Adapter lead MPX/EC3
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
3 x	Smoke set "M"
1 x	Initior Receiver FRX2 Wireless
2 x	Smoke set "S"
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger transmitter GRAUPNER
1 x	"M" set
1 x	Adapter lead MPX/XT60
1 x	White smoke bombs AX-3 (10 pcs)
2 x	USB HLS prog. interface
1 x	Blue smoke canister 140 g
1 x	3 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Hovercraft sailcloth
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	MYLAR film A350 (1000x500 mm)
1 x	15 mm reinforced hinge
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Radial heatsink for MPJ AC25/35-xx motor
2 x	Cooler motor type 400
1 x	Servo slow down unit (0,7-14,7 sec )
2 x	TMM 1210-3S heli
3 x	NF-1 RC set
1 x	Cooler motor type 150
1 x	Swing 1000
3 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	Mini-Pix Esc 15 Amp
1 x
1 x	Double conector with JR adapter and 200 mm extension
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	AX-60 starters (5 pcs)
1 x	MPX Sub-D Adaptor
1 x	Flybar support metal LAMA
1 x	LED blink wire flashing (red - 2pcs)
2 x	Jet Afterburner Simulator NF-Jet3 YSW
1 x	Jet Afterburner Simulator NF-Jet3 RY
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	NF-3XL set
1 x	NF-3X-350 set
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand SebArt
1 x	Vasa model Catapult
1 x	PPM Encoder Module
1 x	PIX Hawk with accesories
1 x	ESC MEZON 115 Opto
1 x	Racor 2/3 mm
2 x	Quicklock washer 4 mm (10 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
2 x	Circlik for shaft 2.3 mm (10 pcs)
2 x	Flat washer 1.7 mm (20 pcs)
2 x	M3-M4 rubber washer (8 pcs)
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	F3A carbon 85 mm spinner for Hacker Q-80
1 x	89 mm INO spinner (carbon imitation)
1 x	F3A carbon 85 mm spinner for AXI
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Interruptor RX/Batterie
1 x	Parachute expulsion foam
1 x	Extension 2/3 lipos JST - JST/C
1 x	PSC 5
1 x	Red smoke canister 65 g
1 x	Heat sink for Optotronix LEDs
1 x	Red smoke canister 140 g
1 x	PCARD Wireless System
1 x	EWC3 40 cm wing connector
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	30 cm BEC cable (female)
1 x	White smoke canister 140 g
1 x
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Actrocon 60A ESC
1 x	FunCub NG azul RR
1 x	Axi for MVVS 3.5 Sport
1 x	Motor Set CHALLENGER Indoor
1 x	CHALLENGER Indoor
1 x	Potenciometro micro
1 x	FUNRAY RR
1 x	ESC RAY G2 R-60SB SBEC
1 x	ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A
2 x	Flat washer 3.2 mm (20 pcs)
2 x	Lock washer 2.2 mm (20 pcs)
1 x	Xoar Electric Beechwood Prop 21x10
2 x	Flat washer 2.2 mm (20 pcs)
2 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
2 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Socket Head Screw M2x10
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
2 x	Screw M3x5 (10 pcs)
1 x	Screw M3x12 (10 pcs)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	SPARK Switch 5.9v
1 x	Male connector for 6 pines AWG
1 x	JETImodel Addcap 1640
1 x	Selfstart electronic switch
1 x	Male connector for 10 pines AWG
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	PROFI TX fastening rings
1 x	Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Propeller Pleg CAM Carbon 14x12
1 x	Propeller Pleg CAM Carbon 10x8
1 x	Propeller Pleg CAM Carbon 16x13
1 x	Propeller Pleg CAM Carbon 10x7
1 x	Propeller Pleg CAM Carbon 12x10
1 x	Propeller Pleg CAM Carbon 13x8
1 x	Propeller Pleg CAM Carbon 12x6.5
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Solvent Plasti Dip 1000 ml
1 x	Refueling Cap V3 Black
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Modulo reglaje avance V3
1 x	JETI SPIN 80 Pro
1 x	Turbina X132 H "Compact Version"
1 x	Servo M2x5/16 screw (4 pcs)
1 x	Captador RCEXL para DA
1 x	Hopper 125 ml XICOY with support
1 x	Propeller Pleg CAM Carbon 14x7
1 x	Propeller Pleg CAM Carbon 10x4
2 x	Screw M3x16 (10 pcs)
1 x	Pan head screw M2x16 PH
2 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Blind nut M6 (4 pcs)
2 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Screw M2x6 (10 pcs)
2 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Servo M2x9/16 screw (4 pcs)
1 x	12 mm floating pad (49 pcs)
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Screw M2.5x8 (10 pcs)
1 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Socket Head Screw M2x5
2 x	Screw M3x20 (10 pcs)
2 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Nut for mounting M3 (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Screw M4x12 (10 pcs)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Socket Head Screw M2x8
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Socket Head Screw M2,5x12
2 x	Quicklock washer 2 mm (10 pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Blind nut M4 (4 pcs)
2 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Screw M3x8(10 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Socket Screw M2x3 mm (4 pcs)
1 x	Pan Head Screw M2x6 PH
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Screw M4x30 (10 pcs)
1 x	Screw KB 1.4x6 mm (10 pcs)
1 x	Screw M4x20 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Socket Screw M3x9 mm
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Female connector for 20 pines AWG
1 x	Magnetic Interruptor MULTIPLEX
1 x	SPARK Switch 12v
1 x	JETImodel SINGLE BEC
1 x	Female connector for 12 pines AWG
1 x	SPS 70V 140/280 A

16,514.44EUR