Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
JetiBOX temporarily out of stock	Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle of incidence meter
1 x	Propeller balancer
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand
1 x	Field folding model stand SebArt
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	Medidor ángulos y/o incidencias
2 x	SE Ring 240 mm (2 pcs)
2 x	Tape GFK 38 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	Marker ties (20 pcs)
2 x	Cinta Goldfix 1m
2 x	Tape GFK 50 mm
3 x	SE Ring 250 mm (2 pcs)
2 x	Tape GFK 25 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Spikes Band (5 m)
2 x	Foil for sticking flaps and ailerons
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	SE Ring 480 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
3 x	SE Ring 350 mm (2 pcs)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors DEANS (T)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Optotronix Aurora Plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Connectors banna oro 6,0 mm (M/F)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	USB HLS prog. interface
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	3 LiPo XH>EH adapter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Tow hook for tug
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Vasa model Catapult
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Vacuum pump P1-N
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Starter EM Gear Power 250
2 x	20x1000 mm Ring Strap Back To Back
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	SE Ring 300 mm (2 pcs)
1 x	Keypad ALTIS V4
1 x	2,3 mm Prop Drive Günther M4
1 x	Soporte carbono MR30 (2 pcs)
1 x	MR30 connector female
1 x	XH female balance (2S) connector (2 pcs)
1 x	Carbon plate 350x150x1.0 mm
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Dean "T" - Futaba Adapter
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	CM-3
1 x	MR30 connector male
1 x	Conector MT-60 (pair)
1 x	PSC 5
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	11 mm wing servo holder
1 x	XT60 Connector with Holder Male 2pcs
1 x	Bidule 111 3000 mm
1 x	Extension 2/3 lipos JST/C
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	MPX PCB "6 Pins", 5 pieces
1 x	Interruptor RX/Batterie
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
2 x	CC 02
1 x	MPX Support
1 x	Cabel charger transmitter GRAUPNER
1 x	Extension 2/3 lipos JST - JST/C
1 x	XH LiPo extension lead
1 x	4 LiPo XH>EH adapter
1 x	DPSI Ampere battery backer
1 x	Connector Sub-D 2+5 Female
1 x	Multi-adapter balancer JST/C - TP
1 x	MPX screwable clips (4 pcs)
1 x	13 mm wing servo holder
1 x	BULLIT Wing 1095 mm
1 x	Contacto macho pin conector (10 pcs)
1 x	SPS Remote switch actuator
1 x	XT-60 connector (male)
1 x	Connectors MPX black female
1 x	USB interface ALTIS
1 x	Opto Gas Engine Kill Switch
1 x	Conector XT-30 (macho)
1 x	Connector Sub-D 2+5 Male
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	LED wire (blue - 2pcs)
1 x	4 mm Prop Adapter M6
1 x	Telemetry interface ALTIS 6 cm
1 x	Device Terminal
1 x	5 mm Prop Adapter M6
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	20x200 mm battery rings
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	MAX BEC 2D plus EX
1 x	Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	SWTU2 switch
1 x	MPS Gas-Cap-Powerswitch
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Cabling for Fox MDM1 wings
1 x	Short Switch On/Off micro
1 x	Manometer 4 mm
1 x	Bidule 111 3000 mm Canopy
1 x	Selfstart electronic switch
1 x	ARTIST 1.560 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Three-position switched channel, short
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller)
1 x	270 mm 3/3 mm shaft ship
1 x	Servo HITEC HS-82 MG
1 x	SyRen 50A 6V-30V Regenerative Motor Driver
1 x	Reductora IPS dual-motor 10,7:1 with spinner

5,597.58EUR