Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	SE Ring 200 mm (2 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Spikes Band (5 m)
2 x	SE Ring 300 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
3 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 25 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
3 x	Cinta Goldfix 1m
2 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 38 mm
4 x	Tape GFK 50 mm
2 x	Ring 320 mm length (5 pcs)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	20x200 mm battery rings
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension 100 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Cabel "Y" 15 cm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension 30 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Futaba male 40 cm extension
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Premium servo extension 100cm
1 x	Premium servo extension 25cm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Circlick securite
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 10 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Adapter lead MPX/EC3
1 x	30 cm BEC cable (male)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	CC 01
2 x	APM2.6 Power module with 5.3V DC BEC
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	4 LiPo XH>EH adapter
1 x	3 LiPo XH>EH adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	CC 03
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Dean "T" - Futaba Adapter
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	30 cm BEC cable (female)
1 x	TrainerCord (master-learner)
2 x	CC 02
1 x	CC 05
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	USB HLS prog. interface
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	MPX-Dean "T" Adapter
2 x	JETImodel SINGLE BEC
1 x	BEC 3A FOXY
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	One touch canopy lock
2 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	SE Ring 350 mm (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	1/10 Pilot "Jack"
1 x	160 mm carbon undercarriage (2pcs)
1 x
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	120x60 mm C SLH KOVO wheel
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	2 LiPo XH>EH adapter
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	X-RAY Micro QR (Rudder)
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	110x55 mm C SLH KOVO wheel
1 x	DPSI magnetic switch actuator (housing)
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	60x25 mm tail wheel "type F3A"
1 x	Absorver mount set for 5-10 Kg models
1 x	Micro Switch button
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Double conector with JR adapter and 200 mm extension
1 x	Cabling for Fox MDM1 wings
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Tip wing protector 28x10x12 (2 pcs)
2 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Spinner NUT M5
1 x	Spinner NUT 1/4x28
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Ball Link Plier
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Digital precision scale up to 2000 g
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
2 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Spinner NUT M6
1 x	Spinner NUT M5
1 x	Spinner NUT M10x1
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	Spinner NUT M8x1,25
1 x	Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	AC-10 pre-rotacion with motor
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Hot Glue Stick GREEN
1 x	Charger ISDT 608AC 200W
1 x	SPS Remote switch actuator
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Switching module high voltage SXH
1 x	UBEC 6A KAVAN
1 x	Head lower part
1 x	Baering 3x8x4
1 x	SKY RC T400Q Charger 4x100w
1 x	24x12 prop Super Silence
1 x	Propeller MASTER 6x3,5
1 x	Propeller POWER-PROP 11x6
1 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	Spinner propeller pleg. 38 mm / 6,0 mm
1 x	Spinner propeller pleg. 30 mm / 5,0 mm
1 x	Motor A30-12 XL Glider

3,080.32EUR