119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Trike XL motor set (motor+esc+prop)
1 x Windsock Ozone L - 700 mm
1 x Ballast 700gr OPALE
1 x Wing OXY 5,0 m2
2 x Parachute PV6 for F3J
2 x Para-RC Mix
2 x Paramotor BackPack XXS 2
1 x Set cintas unión paracaídas 145 cm
1 x Windsock Ozone L -1200 mm
1 x Parachute P4
1 x Rescue 1,8m2 / BackPack
4 x Wing OXY 0,5 pulgadas2
1 x Para-RC Trike "RC-Bullix"
2 x Paramotor Trike XL
1 x MAX pilot ARTF
1 x LUCAS pilot ARTF
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Servo M2x9/16 screw (4 pcs)
1 x Field folding model stand
1 x SE Ring 200 mm (2 pcs)
1 x Extension 15 cm (Futaba)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Extension silicon 30 cm male (Futaba)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Tow hook for tug
1 x Aluminium wide washer M4 Red (4 pcs)
1 x USB Mini Camera endoscope
1 x 15 mm floating pad (30 pcs)
2 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Fixed launching hook
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
2 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
2 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Rubber profile 8-2 mm 2M
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Profile ABS half cane 4x2.5x1000 mm
2 x Xplorer3 anemometro
1 x Dean "T" - Futaba Adapter
1 x XH male balance (2S) connector (2 pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x MPX Sub-D Adaptor
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Support FUEL DOT V3
2 x 4 LiPo XH>EH adapter
1 x ABS angle 3,0x3,0x1000 mm
2 x Oracover Brown 2 m
1 x Ply-Span 450x600/13g White
1 x Oracover Orange 2 m
1 x Oracover Green10 m
1 x Aluminium servo arm (2 uds)
2 x Head spacer
1 x Propeller POWER-PROP 14x10
1 x Propeller POWER-PROP 12x6
1 x Propeller POWER-PROP 13x9
2 x Baering 3x8x4
1 x Balls 4 mm
1 x Propeller electric carbon 9.5x5
1 x Blade holder upper
1 x Propeller electric carbon 6.5x4
1 x 15x7 tree blades propeller
1 x 120x60 mm SLH KOVO wheel
1 x Nut M1,6
1 x Propeller electric carbon 10.5x8
1 x Nut M2 securing
1 x Blade holder lower
1 x Porpeller HUNTER 400
1 x Propeller electric carbon 9.5x7
1 x Propeller electric carbon 10x8
1 x Xoar Electric Beechwood Prop 16x7
1 x Propeller 8x4,3 SlowFlyer
2 x Nut M2
1 x 15x7 tree blades propeller LEFT
1 x 8x6 tree blades propeller
1 x Propeller POWER-PROP 13x10
2 x Screws flush mount M2
1 x Propeller 9x4,7 SlowFlyer
1 x Servo Fork
1 x Propeller POWER-PROP 10x7 Izda
1 x Pitts Muffler kit for CAP 21
1 x Propeller APC 11x10 Electric
1 x Propeller APC 12x6 Electric Pusher
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Parachute BACKUP X100
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 10x7 SF
1 x ACTIVE ARF Electric 1.995 mm
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x ARTIST 1.560 mm
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 12x3.8 SF
1 x Opale Rucksack
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Bearing housing
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 12x6 SF
1 x Propeller APC 10x7 Electric
1 x Propeller APC 10x3,8 SF
1 x Wheel keeper washer
1 x Rotor Mast
1 x Rotorshape Autogyro
1 x Battery plate
1 x Propeller APC 13x4 Electric
1 x Blade holder center
1 x Compact on-board starting system (9713)
1 x Compact on-board starting system (9724)
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Oils Pumps Empty (1 liter)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x SPARK Switch 7.4v
1 x SPS Remote switch actuator
1 x USB interface ALTIS
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x UBEC 6A KAVAN
1 x PowerBox SparkSwitch RS
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Xplorer4 anemometro
1 x Cabel charger transmitter GRAUPNER
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x 30 cm BEC cable (female)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Circlick securite
1 x Baseplate servo
1 x RX external cable for estandar receivers
1 x 460 mm EPP Floats
1 x Blind nut M3 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Blind nut M6 (4 pcs)
1 x SERVO HOLDER
1 x Adjustable launching hook
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x Blind nut M4 (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Towing hook
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Blind nut M2 (10 pcs)
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x Blind nut M5 (10 pcs)
1 x Towing hook <3m
1 x Blind nut M4 (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x Towing hook
1 x Prolonguer for Balancer Thunder Power 6S
1 x Multi-adapter balancer JST/C - TP
1 x Opto Gas Engine Kill Switch
1 x Switching module high voltage SXH
1 x SPARK Switch 12v
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Switc electronic 30 Amp
1 x PWC4 wing/fuselage connector for 4 servos
1 x TrainerCord (master-learner)
1 x Selfstart electronic switch
1 x Opto Gas Engine Kill Switch
1 x SPARK Switch 5.9v
1 x Multi-adapter balancer JST - TP
1 x PSC 6
1 x Short Switch On/Off micro
1 x PSC 5
1 x SBEC 30 D
1 x MPX-Dean "T" Adapter
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Three-position switched channel, short
1 x SPS 70V 100/200 A
1 x SBEC 40
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x TP/TopFuel - XH 2/3S Adapter
1 x ABS rectangular profile 12x6.0x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Xplorer2 anemometro
1 x Profile ABS Square 4 x 1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
2 x Xplorer1 anemometro
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Connector Sub-D 2+5 Female
1 x Oracover Yellow CUB 2 m
1 x Oracover CHROME 2m
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x APM2.6 Power module with 5.3V DC BEC
10,585.96EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies