Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Rotor Mast
1 x	Autogyro Cierva C30 Spain
1 x	Conector BEC male (10 pcs)
1 x	DUPLEX 2.4EX RC Power Switch 10
2 x	Motor A2212/13T
1 x	Transmitter Balancer SPK DX-8
1 x	DUPLEX 2.4EX Central Box 320
1 x	Oracover Yellow CUB 10 m
1 x	Oracover Verde 2 m
3 x	Profile ABS half cane 2.0x1000 mm
3 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Short ball link M1.6 (6 uds)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Stickers-digit for marking
2 x	BALSA trip 8.0x8.0x1000 mm
3 x	20x200 mm battery rings
1 x	CM-3
1 x	Extension silicon 30 cm female (Futaba)
1 x	SE Ring 300 mm (2 pcs)
1 x	Angle of incidence meter
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	Extension silicon 35 cm male (Futaba)
2 x	Profile ABS half cane 3x1000 mm
3 x	Cross Connector 4.0 mm x 1000 mm
1 x	5 LiPo XH>EH adapter
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	3 LiPo XH>EH adapter
2 x	Double conector with JR adapter and 200 mm extension
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
2 x	ABS angle 10,0x10,0x1000 mm
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	A/C quality beech plywood 600x300x8.0 mm
2 x	Extension silicon 25 cm (Futaba)
3 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Joint with bearing M3 22x5,5
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Profile ABS half cane 7.0x1000 mm
2 x	CC 02
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Transmitter JETI Duplex DS-12 EX Special Edition
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	200m servo "Premium" wire (white/red/blue)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Emisora JETI Duplex DS-16 II Carbon Line RED
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Green silicone 0,25 mm² wire (25 m)
1 x
1 x	Glases Nimbus
1 x	3,0x60 mm allen screwdriver
1 x	2,5x60 mm allen screwdriver
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Support pumb/filter Xicoy X45
1 x	ABS Strip 1.5x8.0x1000 mm
1 x
1 x	Glases Moritz
1 x	Yellow smoke canister 100 g
1 x	Servo Fork
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	Oratex Silver 2m
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
2 x	Profile ABS Square 2 x 1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
2 x	Birch plywood plate 600x300x3.0 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Spikes Band (5 m)
1 x	ABS angle 1.5x1.5x1000 mm
1 x	CC 01
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Circlick securite
1 x	Birch plywood plate 600x300x2.0 mm
1 x	30 cm BEC cable (female)
1 x	Adapter lead MPX/EC3
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Birch plywood plate 600x300x2.0 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	SE Ring 400 mm (2 pcs)
1 x	Extension silicon 35 cm (Futaba)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Birch plywood plate 600x300x1.2 mm
2 x	SE Ring 240 mm (2 pcs)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Piloto JET 1:3,5
1 x	Transmitter JETI Duplex DS-12 EX Multimod RED
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple"
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Glases Flitemaster
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Glases Ace
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	SE Ring 200 mm (2 pcs)
2 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	SE Ring 480 mm (2 pcs)
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
2 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Birch plywood plate 600x300x4.0 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Profile ABS Square 3 x 1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Tape GFK 25 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Beech dowels 3.0 x 1000 mm
2 x	SE Ring 330 mm (4 pcs)
2 x	Birch plywood plate 600x300x3.0 mm
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS half cane 4x2.5x1000 mm
2 x	L-Connector 1.0 mm x 1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
2 x	Birch plywood plate 600x300x4.0 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	Profile ABS half cane 4x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Ring 320 mm length (5 pcs)
2 x	Profile ABS Square 4 x 1000 mm
2 x	Marker ties (20 pcs)
1 x	Pine wood slat 3.0x10.0x1000 mm
2 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	SE Ring 350 mm (2 pcs)
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Rubber profile 6-2 mm 2M
1 x	Profile ABS half cane 6.0x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Tape GFK 38 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Cabling for Fox MDM1 wings
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension 90 cm (Futaba)
1 x	CC 05
1 x	Extension PVC 150 cm (Graupner)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Suncover 100cc Red
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Cinta Goldfix 1m
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Extension silicon 50 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Extension 30 cm (Futaba)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Connector CAN 15
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Premium servo extension 25cm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Extension silicon 30 cm male (Futaba)
1 x	Futaba male 40 cm extension
1 x	SE Ring 450 mm (2 pcs)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)

8,945.61EUR