168.00EUR

SPS 70V 140/280 A
[EMCA72012]


- Electronic safety switch with anti flash protection. The original! From the inventor of the "gas cap" switch.

- Electronic safety power switch for electric power systems. An anti-flash-circuitry prevents the dreaded sparks during connecting the battery.

- Separates the motor from the battery. The electric motor drive remains inactive and therefore non hazardous until activation. Finally you can work on your model without the fear of suddenly running motors.

- High-class silicone connection cable of 4mm² (AWG11) thickness. 6-fold multilayer-board with up to 9mm² copper width.

- For 6S up to 16S LiPo batteries (18V to 70V). 140A continuous current and 280A peak current - perfect for F3A models.

Attention: The flash protection function of the SPS does not pre-charge the capacitor within the motor controller! Some manufacturers require the pre-charging of this capacitor. Perhaps the SPS might not work properly in this special case.

Delivery includes desired switch actuator with keyring pendant or SPS-RCS, screws, EMCOTEC 3D sticker, operating instructions.

ATTENTION: because of customer demands you are able to select the switch actuator you want! Please select the fitting unit. By default the SPS magnetic switch actuator will be delivered.

Specifications:
- Voltage range: 18V to 70V (6S to 16S LiPo)
- Power consumption (switched off): max. 0.5 mA, typ.0.25 mA
- Permanent current: 140 A
- Max. peak current: 280 A
- Power dissipation at 140 A: aproxx. 9.6 W
- Dimensions: 65x30x20 mm (2.56x1.18x0.79 in)
- Weight inl. cable (4 mm²/AWG11): 105 g (3.7 oz)




temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Fuel tank fiberglass Easy Jet 2,2 l
Fuel tank fiberglass Easy Jet 2,2 l

temporarily out of stock
temporarily out of stock

Spinner 100 mm CFK
Spinner 100 mm CFK

temporarily out of stock
temporarily out of stock

Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har

temporarily out of stock
temporarily out of stock

MPS Gas-Cap-Powerswitch
MPS Gas-Cap-Powerswitch

temporarily out of stock
temporarily out of stock

Epoxy SLOW-CURE™ 30 min (130g)
Epoxy SLOW-CURE™ 30 min (130g)

temporarily out of stock
temporarily out of stock

Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Parachute BACKUP X100
2 x Ignition bed V2 Red color
1 x Shirt Hispano Aviación
1 x DLE 30 complete electronic ignition
2 x Aluminium ignition bad (red)
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Blocking screws M6 gas engine
1 x Electric spoiler 300 mm (2 pcs)
1 x Canopy Sweet / Siesta
1 x Propeller diller for DLE111 and DA85-150
1 x Electromotor starter EME 35cc
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x HBC 10035-3 32-Bit
1 x Aluminium ignition bad (blue)
1 x Compact on-board starting system (9715)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Adapter lead MPX/EC3
1 x CC 05
1 x Long pinned hinge (12 uds)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x PPM Encoder Module
1 x Profile ABS half cane 5.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x DPSI magnetic switch actuator (housing)
1 x Balsa panel 2.0x100x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Propeller electric carbon 9.5x6
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x 1/6 Pilot "Buddy"
1 x BALSA trip 4.0x4.0x1000 mm
1 x Ventus 1:4 set of instruments
1 x Extension 7.5 cm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Propeller electric carbon 7x7
1 x PT 21x13 EL Propeller 3 Blade
1 x Nylon hinge 20x15x0,3 (10 pcs)
2 x Extension silicon 50 cm (Futaba)
1 x Profile ABS half cane 6.0x1000 mm
1 x 41x5,5 mm wires output (2 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Pin hinge 34x16 mm (10 uds)
1 x Joint with bearing M2 22x5,5
1 x Allen wheel collar M4x6
1 x Jeti Black cap
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x CM-3
1 x Piloto JET 1:3,5
1 x 200 mm extensión servo HITEC/JR
1 x Carbon fiber rod 14 mmx1000 mm
2 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Propeller 12x6 Falcon electric
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x 15x7 tree blades propeller LEFT
1 x 4,8x1000 mm 2:1 red termoretract tube
2 x Futaba male 40 cm extension
1 x Support Antena 2.4 Ghz (2 pcs)
1 x 1/4 Pilot "Heidi"
1 x Oracover Brown 2 m
1 x Towing hook
1 x Propeller balancer
1 x Canopy Astra
1 x Piston ring for ZG 20 and G240RC
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Propadapter for motor A60-V2
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x SE Ring 350 mm (2 pcs)
1 x Snap short M2 (10 uds)
1 x Profile ABS half cane 8.0x1000 mm
1 x 20x200 mm battery rings
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Extension silicon 75 cm (Graupner)
1 x SPS 70V 100/200 A
1 x SBEC Jeti
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x Miniature brass strap hinge, 1 m
1 x Compact on-board starting system (9713)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Propeller diller for EME35 and DLE35
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Snap for floding prop for 2 mm axi
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x Birch plywood plate 600x300x4.0 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Indoor hinge with servo arm integraded
1 x Ring 320 mm length (5 pcs)
1 x Lite Plywood panel 600x300x3.0 mm
1 x Gates hinge aluminium (1 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Press fitting for 0,5 diam. steel cable (10 pcs)
1 x Pine wood slat 3.0x5.0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Profile ABS half cane 2.5x1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Fully Threaded Steel Rod M3
2 x Pine wood slat 2.0x10.0x1000 mm
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Pushrod octagone 4/3 with coupler M3
1 x Locking cable tie 3.2x142 (uds)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Linden wood slat 3.0x3.0x1000 mm
1 x SE Ring 330 mm (4 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Extension silicon 35 cm male (Futaba)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x L-Connector 4.0 mm x 1000 mm
1 x Extension silicon 75 cm (Futaba)
1 x Pushrod octagone 3/2
1 x 20x1000 mm Ring Strap Back To Back
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Extension 30 cm (Futaba)
1 x Birch plywood plate 600x300x2.0 mm
4,174.33EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies