119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x MAX pilot ARTF
2 x Rescue 1,8m2 / BackPack
1 x Set cintas unión paracaídas 145 cm
2 x Paramotor BackPack XXS 2
1 x Ballast 700gr OPALE
2 x Wing OXY 0,5 pulgadas2
1 x LUCAS pilot ARTF
1 x Para-RC Mix
2 x Parachute PV6 for F3J
2 x Opale Rucksack
1 x Para-RC Trike "RC-Bullix"
2 x Paramotor Trike XL
1 x Servo NARO Max Std
2 x SERVO DES 588 BB MG
1 x Swashplate metal LAMA
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Oracover Black 10 m
1 x Green smoke canister 140 g
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 15 mm reinforced hinge
1 x Fixed launching hook
1 x B4-0 rocket charges (6 pcs)
1 x Ferrita 27x14x7 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Long ball link M1.6 (6 uds)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Extension 100 cm (Futaba)
1 x Ply-Span 450x600/13g White
1 x M3 Maxi ball link (2 uds)
1 x Profile ABS Square 2 x 1000 mm
1 x Futaba Female 40 cm extension
1 x Strip ABS 2.0x8.0x1000 mm
1 x Short ball link M3 (6 uds)
1 x Short ball link M2 (6 uds)
1 x 2,5x60 mm allen screwdriver
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Vacuum pump 12 CFM
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Extension PVC 150 cm (Graupner)
1 x Yellow smoke canister 100 g
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x 800TVL CMOS camera for FPV
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x 30 cm BEC cable (female)
1 x ABS tube 8.0x6.0x1000 mm
1 x Receiver GRAUPNER GR-12 HoTT
1 x Receiver GRAUPNER GR-16 HoTT
1 x VARIO module Hott
1 x BABY glider drawings (Aero-naut)
1 x X-RAY Micro QR (Elevator)
1 x Motor OS FS 75 AX
1 x Motor OS 3820-1200 electric
1 x OS 37 SZ-H, Crankshaft
1 x OS 40-FG 4T Motor
1 x Charger LiPo Charger4
1 x POLARON EX 800w charger
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Crystal TX 35.050 Ch 65
1 x Crystal Universal RX 35.040 Ch 64
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Steel brush wheel with 2.35mm
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Welder 100W/200V
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Propeller diller for DA50, DLE55 red
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Tachometer Hyperion Multi-pala
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Large flex hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 
1 x Long pinned hinge (6 uds)
1 x Tool for entel
1 x Heat Seal Iron
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Angle measurer
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x 4 LiPo XH>EH adapter
2 x 150 Newtons FEMA absorber
2 x Wheel collar 2 mm Ø (4 uds)
2 x Adapter lead MPX/EC3
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Wheel collar 4 mm Ø (4 uds)
2 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x 2 LiPo XH>EH adapter
1 x Double conector with JR adapter and 200 mm extension
1 x Medidor ángulos y/o incidencias
1 x Truck-trailer for gliders 720 x 285 mm
1 x SERVO HOLDER
1 x DPS Switch JR/JR
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x DPSI Ampere battery backer
1 x Cabling for Fox MDM1 wings
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Battery charging cable XT60
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 400 Newtons FEMA absorber
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Adapter lead MPX/XT60
1 x Mudguard for 140/165 mm wheels
1 x Absorver mount set for 5-10 Kg models
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Bec MR UBEC 5A (5v/6v/7v)
7,568.16EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies