Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	2 LiPo XH>EH adapter
2 x	4 LiPo XH>EH adapter
2 x	Dean "T" - Futaba Adapter
2 x	Connector Sub-D 2+5 Male
5 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CC 05
3 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Connector CAN 15
2 x	CC 03
4 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
3 x	CC 02
2 x	Circlick securite
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
3 x	Double conector with JR adapter and 200 mm extension
1 x	BEC 3A FOXY
3 x	DPS Switch JR/JR
3 x	3 LiPo XH>EH adapter
2 x	Connector Sub-D 2+5 Female
2 x	30 cm BEC cable (female)
3 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
3 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
3 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
3 x	30 cm BEC cable (male)
2 x	Cabel charger transmitter GRAUPNER
1 x	Solvent Plasti Dip 1000 ml
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Universal Colour Paste deep black 50 g
1 x	APM2.6 Power module with 5.3V DC BEC
1 x
1 x	Partall paste 650 g
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Hobbylite Filler, Balsa colour
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	CM-3
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Adapter lead MPX/EC3
2 x	JETImodel SINGLE BEC
2 x	Spray EC Red 400ml
1 x	CC 01
2 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Spray Graphit 33
2 x	Adapter lead MPX/XT60
1 x	1000 ml sealer (DOPE)
1 x	Painting GHT Lexan Black 150 ml
1 x	Universal Colour Paste white 50 g
1 x	MPX-Dean "T" Adapter
1 x	Paint gun for sprays
2 x	5 LiPo XH>EH adapter
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Release wax 250ml
1 x	Spannlack 1000 ml
1 x	Nitroverdu 500 ml
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Horn 6/27 with M3 Bearing
1 x	Horn 5/10 with M2 Bearing
1 x	Horn 16,5x20 mm (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	6 mm M3 variable inclined horn
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	6 mm M3 variable horn
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Xplorer1 anemometro
1 x	Xplorer2 anemometro
1 x	Horn for flap control (1 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 5/15 with M2 Bearing
1 x	Cable control set
2 x	Hacker X-Pro USB interface V2
1 x	Male connector for 16 pines AWG
1 x	Long Switch On/Off micro
1 x	Interruptor RX/Batterie
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Male connector for 6 pines AWG
2 x	Female connector for 12 pines AWG
1 x	MAX BEC
1 x	Extension 2/3 lipos JST - JST/C
1 x	Magnetic Interruptor MULTIPLEX
2 x	Extension 5 lipos JST/C - JST
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Windsock Ozone L -1200 mm
2 x	USB interface ALTIS
1 x	Motor DLE 170 M- Paramotors
1 x	Vest clothes Hispano Aviación
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	13 mm wing servo holder
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	57 mm micro-mini servo cover
1 x	Spray adhesive AEROFIX 2
1 x	Angle of incidence meter
1 x	DPSI magnetic switch actuator (housing)
1 x	Astra wing Joinner (Top Model)
1 x	Avia spare blue cockpit (Top Model)
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	PSC 5
2 x	3,2x1000 mm 2:1 black termoretract tube
1 x	Extension 2/3 lipos JST/C
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	2,4x1000 mm 2:1 black termoretract tube
2 x	500 ml sealer (DOPE)
2 x	Universal Colour Paste deep black 250 g
1 x	20 g tin paste
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	SPS 70V 100/200 A
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Horn mando small (2 pcs)
1 x	Control horn long w/ball
1 x	Horn 6/35 with M3 Bearing
1 x	Cable with accesories
1 x	Micro control horn T2 Ø 1
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Extra long horn 60x30
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	SPS Remote switch actuator
1 x	Female connector for 10 pines AWG
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	SIG Coverall 1.2x0.9 m
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	6,4x1000 mm 2:1 black termoretract tube
2 x	6,4x1000 mm 2:1 green termoretract tube
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	PVC termo-retract battery 95 mm blue transparent (1 m)
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Female connector for 6 pines AWG
1 x	SPARK Switch 7.4v
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Solarfilm Lite blue transp. 5m
1 x	JETImodel Addcap 1640
1 x	Male connector for 10 pines AWG
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	Fiberglass spinner Ø125mm fixed by a central screw
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	Servo HITEC HS-5087 MH
1 x	Servo HITEC HS-45 HB, servo box
1 x	Servo HITEC HS-225 BB
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Motor XPOWER F2919/10 F5J Light
1 x	XPower XC3522/5 LS
1 x	Pegasus 2050 mm F4J (Top Model)
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	Clip mini fixing for wing (2 pcs)
1 x	Prelude ARF 2500 mm (TopModel)
1 x	EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61
1 x	Grafas ARF 3.0 m (Top Model)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Xoar Electric Beechwood Prop 20x10
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Welder 100W/200V
1 x	PVC lilac battery termo-retract 70 mm (10 m)
1 x	Adjustable launching hook
1 x	Gracia (Top Model)
1 x	Towing hook
1 x	Servo HITEC HS-5485 HB Digi
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Servo HITEC D131 MW nano
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo HITEC HS-5084 MG
1 x	Servo HITEC HS-55
1 x	Servo HITEC HS-485 HB
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x	Servo HITEC D85 MG
1 x	Servo HITEC HS-5475 HB Digi
1 x	Servo HITEC D-955 TW Titanium
1 x	Servo HITEC HS-5245 MG Digi
1 x	Servo HITEC HS-5085 MG Digi
1 x	Servo HITEC D950 TW
1 x	Servo HITEC D941 TW
1 x	Servo HITEC HS-53
1 x	Servo HITEC HS-225 MG
1 x	Servo Robbe FS 525 BB MG HV
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-125 MG
1 x	Servo HS-5565MH High Voltage
1 x	Servo lock HS-80/81/82/85 (2 pcs)
1 x	Servo HITEC HS-5585MH
1 x	Servo Digital HITEC HS-5065 MG
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover Azul 2 m
1 x	Oracover Red 2 m
1 x	ORACOVER transparent Yellow (10 m)
1 x	EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ...
1 x	Stickers-digit for marking
1 x	GRAFAS MAXI ARF
1 x	XPower XC4226/12 LS
1 x	Ka 8 B (Top Model)
1 x	Turbina JetsMunt M166TS
1 x	NIKE-2 EVO ARF
1 x	KABRIOLIN 3D Electric 1.4m
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	Oracover White 2 m
1 x	XPower H PROP HUB Ø6.0/42.5mm 0º
1 x	Oracover Verde 2 m
1 x	FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	ORACOVER Ferrari red (2 m)

14,947.06EUR