Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	12 mm floating pad (49 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Blue smoke canister 140 g
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	10 mm gas motor standoff
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Red smoke canister 65 g
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	45 mm gas motor standoff
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Extension lead 15 cm Multiplex
1 x	Futaba male 40 cm extension
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	5 mm Prop Adapter M8
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	Propeller POWER-PROP 11x8
1 x	5 mm Prop Adapter CN-Spinner
1 x	Horn 5/15 with M2 Bearing
1 x	Propeller electric carbon 6x5
1 x	Pine wood slat 10x10x1000 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Connector Sub-D 2+5 Male
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Long pinned hinge (6 uds)
1 x	Propeller electric carbon 10.5x7
1 x	Cinta Goldfix 1m
1 x	Field folding model stand SebArt
1 x	Spikes Band (5 m)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Screw M3x16
1 x	Tape GFK 25 mm
1 x	Steering lever
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Crystal Universal RX 35.040 Ch 64
1 x	PPS-4D Propeller
1 x	Crystal TX 35.050 Ch 65
1 x	TMM 1210-3S heli
1 x	Tail tube RAINBOW
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	PropCover 16-20" (2 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	PT 21x13 EL Propeller
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Green smoke canister 65 g
1 x	Round Rod 1,0x1000 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	1/10 Pilot "Jimmy"
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	6 mm M3 variable inclined horn
1 x	Horn with ball 40x30
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	DPS Switch JR/JR
1 x	Jeti Black cap
1 x	Micro flex hinge (12 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Propeller electric carbon 8.5x5
1 x	Piloto jet 130 mm
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Circlick securite
1 x	Propeller electric carbon 6.5x4
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	Horn DUBRO 1/2A
1 x	Tape GFK 38 mm
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Suncover 100cc Red
1 x	Oracover Azul 2 m
1 x	Glases Nimbus "Black"
1 x	Oracover Black 2 m
1 x	20x1000 mm Ring Strap Back To Back
1 x	Program 5v SIO RS 232
1 x	EasyFLY Addon
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Crystal Universal RX 35.070 Ch 67
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Round Rod 6,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	15 mm gas motor standoff
1 x	Initior Transmitter FTX2 Wireless
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Strip 2,5x1,25x330 mm
1 x	Shaft sleeve LAMA
1 x	Round Rod 1,25x1000 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Round Rod 1,5x1000 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Parachutist
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	25 mm gas motor standoff
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	3l Smoke oil
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Antenna Hole Cap V1 (Silver)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Remote electric ignition system
1 x	White smoke canister 100 g
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Yellow smoke canister 100 g
1 x	Carbon blade 230 mm
1 x	Smoke set "Glider"
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Aluminium battery holder red
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Support pump Xicoy X45
1 x	Conector JAPAN G2 Set 5 pares
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Ferrita 27x14x7 mm
1 x	Cockpit plastic closing
1 x	Support FUEL DOT V3
1 x	Cable control set
1 x	ABS tube 7.0x6.0x1000 mm
1 x	4 mm Prop Adapter M8
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	5 mm M2 variable horn
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Flap hinge (6 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Long pinned hinge (12 uds)
1 x	1/12 Pilot "Tom"
1 x	15x7 tree blades propeller
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Extension 100 cm (Futaba)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Propeller electric carbon 8.5x7
1 x	Towing hook <3m
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Ferrita 17x10x6.5 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	2 mm Prop Adapter M6
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	One touch canopy lock
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	CC 01
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Conector JR Servo female (10 pcs)
1 x	Propeller electric carbon 10x6
1 x	Futaba Female 40 cm extension
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	10 mm Prop Adapter M12
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	Piloto Jet "Red" 1/6 Scale
1 x	SERVO HOLDER
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	DPSI Ampere battery backer
1 x	Prop Shaft Adapter 5 mm "long"
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Adjustable launching hook
1 x	Premium servo extension 50cm
1 x	1/12 Pilot "Fighter"
1 x	BALSA trip 10x10x1000 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Battery charging cable XT60
1 x	Pilot "Anthony" (Slimline)
1 x	Beech dowels 4.0 x 1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Bag connector 2 mm

3,749.48EUR