16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]


This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Spark motor OS nº 3
Spark motor OS nº 3

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x M3 Maxi ball link (2 uds)
2 x Propeller balancer
1 x Dremel PERMAGRIT 18 mm round lime
2 x ABS rectangular profile 10x5.0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
2 x Propeller balancer
1 x JR silicone servo wire 0,35 qmm / 5m
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x ABS angle 1.5x1.5x1000 mm
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x BABY glider (Aero-naut)
1 x DINO Glider ARC
1 x X-RAY Micro QR
1 x X-RAY Micro QR (Rudder)
1 x 1804 2400KV Brushless Motor Qav 250 mini
2 x Electric spoiler 300 mm (2 pcs)
1 x AXI 2204 Multicopter
1 x TAKEO 3.6m electric
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Canopy Astra
1 x Combo 4 pcs AXI 2204 Multicopter
1 x 250 mm / 16 mm Airbrakes
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x Strip ABS 2.0x3.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x 3l Smoke oil
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Adapter lead MPX/EC3
1 x Initior Transmitter FTX2 Wireless
1 x Yellow smoke canister 100 g
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Dean "T" - Futaba Adapter
1 x 30 cm BEC cable (female)
2 x ABS tube 16.0x14.0x1000 mm
2 x WingFix ULTRA Black Edition
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Dremel 3000 130W
1 x Red smoke bombs AX-60 (5 pcs)
1 x Strip 2,5x1,25x330 mm
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Oracover Brown 2 m
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x ABS "T" angle 6.0x6.0x1000 mm
2 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Digital scale up to 40 kg
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Pin hinge 39x20 mm (10 uds)
1 x 5 LiPo XH>EH adapter
1 x APM2.6 Power module with 5.3V DC BEC
1 x Field folding model stand
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x 3 LiPo XH>EH adapter
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x PC-21 2880 mm Spinner 5Blade red
1 x RANGER Jet CANADA 1.854mm combo
1 x 290 mm M5 Prop shaft
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Release film 100 cm x 50 m
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x EasyFLY Addon
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x BD-5J ARF+
1 x FELIX JR Red/Yellow 1750 mm
1 x Boeing (TX) T-7A RED HAWK
1 x Truck-trailer for gliders 720 x 285 mm
1 x Glider STROLCH
1 x PC-21 XXL Bags
1 x BABY glider drawings (Aero-naut)
1 x FELIX SportJet Blue/Green 2200 mm
1 x PC-21 2.880 mm SINGAPUR scheme
1 x PC-21 2.880 mm WHITE/RED
1 x PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x VIPER SL Thunderbird PNP 2270 mm
1 x VIPER SL YELLOW PNP 2270 mm
1 x Propeller 11x4,7 SlowFlyer
1 x XICOY X45 rail
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Boomerang SPRINT V2 Red/Yellow
1 x ABS tube 2.0x1.0x1000 mm
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x Servo M2x9/16 screw (4 pcs)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x RANGER Jet Red/White 1.854mm combo
1 x Panel Honeycom carbon 350x150x3.5mm
1 x SIMtransmitter 6 Mode 2
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x GameCommander USB Universal
1 x Field folding model stand SebArt
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Fiberglass tube 6/4x1000mm
1 x Switching module high voltage SXH
1 x MAX BEC
1 x Servo-V-Limiter 5.2V
1 x DPS Switch JR/JR
1 x USB interface ALTIS
1 x DPSI 2001 RV
1 x Switc electronic 30 Amp
32,542.85EUR
Manufacturers
Manufacturer Info
SETLO
SETLO Homepage
Other products
Languages
Español English
Currencies