Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock	Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Oratex Red Fokker 10 m
1 x	Oratex Silver 2m
1 x	Oracover Yellow CUB 10 m
2 x	Oracover Red 2 m
1 x	Monokote BLANCO jet (1.8x0.65m)
2 x	Oracover Azul Cielo 2 m
2 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Ply-Span 450x600/13g White
1 x	Oracover White 10 m
1 x	Ply-Span 450x600/13g Yellow
2 x	Oratex Yellow Cub 10 m
1 x	Oratex White 2m
1 x	Oracover White 2 m
1 x	Oracover CHROME 2m
1 x	Ply-Span 450x600/13g Orange
1 x	Oracover Verde 2 m
1 x	Ply-Span 450x600/13g Black
2 x	Oratex Natural White 2m
3 x	Extractor piñones 2.3/3.2 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Ferrita 14x8x5.5 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
3 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Threaded coupler M3 (10 uds)
2 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
2 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x	Z type of cable coupler Ø 1 (2 uds)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Landing gear retract neumatic (Jet Legend)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Extension silicon 75 cm (Futaba)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Sanyo TX Battery Eneloop 9,6 V 2500 mAh
3 x	Oracover Black 10 m
2 x	Sanyo TX Battery Eneloop 9,6 V Hitec
1 x	Oratex Natural White 20m
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover Black 2 m
1 x	Oracover Green10 m
2 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Oracover Brown 2 m
1 x	12.7 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Kontronik ProgUnit
2 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Jeti Advance Pro Program Card
1 x	Regulador Jeti Jes 045
1 x	Ferrita con funda
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	Charger LiPo Charger4
1 x	Shaft sleeve LAMA
1 x	Pulley brass 8/2 (2 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Astra (Top Model)
1 x	37 mm PVC transparent battery termo-retract (1 m)
2 x	Sanyo TX Battery Eneloop 7,2 V MPX
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	11 mm wing servo holder
1 x	Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	RX Battery Eneloop 6,0 V JR 2500 mAh
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Oracover light Grey 2m
1 x	Ply-Span 450x600/13g Blue
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Electric spoiler 185 mm (2 pcs)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Sanyo RX Battery Eneloop 4,0 V AAA JR
1 x	Astra wing Joinner (Top Model)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	FOXY G2 C3530-700
1 x	Jeti Advance Plus Program Card
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
2 x	PPS-4D Propeller
2 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Z type of cable coupler Ø 2 (2 uds)
2 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
2 x	4 mm M3 red control terminal (4 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Servo NARO Max Std
1 x	GPS, Vario and altitude Sensor SBS-01G
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Porta Kwik link M4 4 mm (2 pcs)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler M2 (10 pcs)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	Kwik link with arm M3xM2xL24
1 x	Carbon blade 230 mm
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	9x4.7 * 22x12 carbon propeller
1 x	Metal clevis M2 (10 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Motor Advance 50-6
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Carbon blade 3D 230 mm
1 x	Swashplate metal LAMA
1 x	wire tensioner (black)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Metal clevis M2,5 (10 uds)
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Servo Controller Fibra optica
1 x	Angled clevis with threaded rod M3
1 x	Wire easy tensioner (red)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm

5,967.28EUR