Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Adjustable launching hook
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
3 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	25 mm reinforced hinge
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Miniature brass strap hinge, 1 m
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Xplorer3 anemometro
1 x	Xplorer2 anemometro
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	CC 01
1 x	30 cm BEC cable (female)
2 x	Adapter lead MPX/EC3
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	CC 05
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	Xplorer4 anemometro
1 x	4 LiPo XH>EH adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Adapter lead MPX/XT60
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	MPX-Dean "T" Adapter
3 x	Xplorer1 anemometro
2 x	30 cm BEC cable (male)
1 x	3 LiPo XH>EH adapter
1 x	CC 03
2 x	5 LiPo XH>EH adapter
2 x	TP/TopFuel - JST-EH 4/5S Adapter
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	USB HLS prog. interface
2 x	Cabel charger transmitter GRAUPNER
2 x	SE Ring 450 mm (2 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Tape GFK 25 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Tape GFK 38 mm
1 x	20x200 mm battery rings
1 x	Foil for sticking flaps and ailerons
2 x	SE Ring 480 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	2 LiPo XH>EH adapter
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	"S" set for planes
1 x	SE Ring 330 mm (4 pcs)
1 x	Smoke set "M"
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Opto Gas Engine Kill Switch
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
2 x	PSC 6
2 x	Opto Gas Engine Kill Switch
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Body for landing gear Ø 4 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Small flex hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	PSC 5
1 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Magnetic Interruptor MULTIPLEX
1 x	Gates hinge
1 x	Aero shocks
2 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Faucet FESTO
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Nylon threaded block M6 (2 uds)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Nylon gear block Ø 5 mm (2 uds)
1 x	Interruptor SPS 70v 60/120A
1 x	USB interface ALTIS
1 x	SBEC Jeti
1 x	Festo 6mm Tubing Holder (10 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	TrainerCord (master-learner)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Three-position switched channel, short
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Male Prolonger TP 4/5S
2 x	MPS Gas-Cap-Powerswitch
1 x	SBEC 40
1 x	Large flex hinge (12 uds)
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	18 mm reinforced hinge
1 x	Festo Adaptor Tygon Large/4mm
1 x	SBEC 30 D
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Landing gear strap medium (4 uds)
1 x	Extension 2/3 lipos JST - JST/C
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	MAX BEC
1 x	Female connector for 12 pines AWG
1 x	Male connector for 6 pines AWG
1 x	Red smoke canister 140 g
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Yellow smoke canister 100 g
1 x	SE Ring 360 mm (2 pcs)
2 x	Tape GFK 50 mm
1 x	PCARD Wireless System
2 x
1 x	Smoke set "S"
1 x	Parachute expulsion foam
1 x	Blue smoke canister 100 g
1 x	BLUE Colored Liquid smoke for turbine 0.75 l
1 x	Turbo Prop KS
1 x	Receiver bed (Blue)
1 x	Motor mount for 1 m models
1 x	Circlick securite
1 x	Metalic motor holder for class 550-600
1 x	Hacker A30-S Radial Set
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Crystal TX 35.010 Ch 61
1 x	Motor mount VANQUIST 48" F3A
1 x	Crystal TX 35.100 Ch 70
1 x	Turbine RABBIT 100 SE 11 Kg
1 x	Suncover 100cc Red
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Connector Sub-D 2+5 Female
1 x	Bearings for motor HACKER C50
1 x	Size "M" motor holder for class 600
1 x	A50 Motor Mount Alu complete set
1 x	Central support Speed 600
1 x	Size "L" motor holder for class 600
1 x	Cooler motor type 280
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cooler motor type 300
1 x	XPower XC3522/5 LS
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x
1 x	"Y" charging 4mm wire (2 IN-1 OUT).

11,229.97EUR