Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Ply-Span 450x600/13g White
2 x	Small aluminium horn blue (2pcs)
1 x	Xplorer4 anemometro
1 x	Horn 5/20 with M2 Bearing
2 x	6 mm red aluminium threaded horn with patella
2 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Black
1 x	Horn 5/10 with M2 Bearing
1 x	Horn 5/15 with M2 Bearing
1 x	Oracover Verde 2 m
1 x	Oracover ROYAL RED 2m
1 x	Ply-Span 450x600/13g Yellow
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Xplorer2 anemometro
2 x	Horn with ball 55x40
1 x	Oracover CHROME 2m
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oratex Natural White 2m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Ply-Span 450x600/13g Orange
2 x	Ply-Span 450x600/13g Red
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Oracover Yellow CADMIO 2 m
2 x	ORACOVER Ferrari red (2 m)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Small aluminium horn red (2pcs)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oratex White 2m
2 x	Oratex Red Fokker 10 m
1 x	Oracover Green10 m
1 x	Oracover Yellow CUB 2 m
1 x	Oratex Antik 2m
2 x	ORACOVER Fluor red (2 m)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Oracover Yellow CUB 10 m
3 x	SlowFlyer control horn (3 pcs)
1 x	Ply-Span 450x600/13g Blue
1 x	Oracover Azul 2 m
1 x	Oracover Brown 2 m
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Oracover White 2 m
2 x	Oracover Azul Cielo 2 m
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Oracover Orange 2 m
1 x	Oratex Yellow Cub 10 m
1 x	PROFICOVER 5m
1 x	Horn 6/27 with M3 Bearing
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Oratex Natural White 20m
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Cable control set
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Horn 6/35 with M3 Bearing
2 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
2 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
2 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 5.0x4.0x156 mm
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x	ABS tube 8.0x7.0x1000 mm
2 x	ABS tube 12.0x10.0x1000 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	CC 02
1 x	4 LiPo XH>EH adapter
1 x	2 LiPo XH>EH adapter
1 x	CC 01
1 x	CM-3
1 x	CC 05
2 x	TrainerCord (master-learner)
2 x	3 LiPo XH>EH adapter
1 x	Adapter lead MPX/EC3
1 x	JETImodel SINGLE BEC
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	BEC 3A FOXY
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Dean "T" - Futaba Adapter
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Glider Ka 7 Red (2540mm)
1 x	Horn mando small (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	20 mm carbon horn
1 x	Adjustable brass horn threaded M3
1 x	Oracover Yellow CADMIO 10 m
1 x	PVC yellow battery termo-retract 69 mm (10 m)
1 x	Support pump Xicoy X45
1 x	SIG Coverall 1.2x0.9 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	SIG Coverall 1.2x4.5 m
1 x	PVC lilac battery termo-retract 70 mm (10 m)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support Pitot JETI
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	CC 03
1 x	Oracover CARBON Metalic 1 m
1 x	Xplorer3 anemometro
3 x	Ferrita 27x14x7 mm
2 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	NF-3X-80 liner Kit
1 x	Jet Afterburner Simulator NF-Jet3 RYS
1 x	ABS angle 6,0x6,0x1000 mm
2 x	Ferrita 17x10x6.5 mm
1 x	EasyFLY Addon
1 x	GameCommander USB Universal
2 x	ABS tube 14.0x10.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Steel Screw M1x8 (10 pcs)
1 x	Rotorshape Autogyro
1 x	AC-10 pre-rotacion with motor
1 x	Screw M3x16
1 x	Head lower part New
1 x	PSC 6
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Cabling for Fox MDM1 wings
1 x	Female connector for 6 pines AWG
1 x	Extension 2/3 lipos JST/C
1 x	Male connector for 6 pines AWG
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	SBEC 30 D
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Switc electronic 30 Amp
1 x	Extension 2/3 lipos JST - JST/C
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Micro control horn T2 Ø 1
1 x	Canopy Astra
1 x	Rudder forward 70x28 "type Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Small adjustable control horn with bearing
1 x	Short adjustable control horn 3x24
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Micro control horn (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Small control horn with bearing (2 pcs)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Rudder forward 90x28 "type Kato"
1 x	Small aluminium horn gold (2pcs)
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Balls 4 mm
1 x	LA500 nose
1 x	Head core bushing
1 x	Head runner
1 x	Complet landing gear
1 x	Nut hélice Largo 2.25" (5.7 cm)
2 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
2 x	Ferrita 14x8x5.5 mm
1 x	X-RAY Micro QR (Rudder)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Flap hinge (6 pcs)
1 x	Decorative caps, multicoloured
1 x	Decorative caps, multicoloured, short
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	LA500 Blades
1 x	Blade holder center GFK 0,5 mm
1 x	LA500 pre-rotation gear hub
1 x	LA500 Autogyro
1 x	LA500 freewheel bearing
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	LA500 cyclic central part
2 x	MAX BEC 2D plus EX
1 x	15 mm reinforced hinge
1 x	NF-3X-350 set
1 x	SPS 70V 140/280 A

6,187.19EUR