119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Joint with bearing M2,5 22x5,5
2 x Blue metalic ball link M3/3 azul (2 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x M3 Maxi ball link (2 uds)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
2 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Long ball link M3 (6 uds)
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Ball link M3 RPA's-UAV's
1 x Ball link M3 (10 pcs)
1 x Long ball link M1.6 (6 uds)
1 x Long ball link M2 (6 uds)
1 x Joint with bearing M3 22x5,5
1 x Ball link M3 (10 pcs, flat ball)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x M2 5Diam black ball link V2 (2 pcs)
2 x Ball link M1.6 (6 uds)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x 6 mm ball link M3 (10 pcs)
1 x M3 Maxi ball link (2 uds)
2 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Extinguisher CO2 - 2 Kg
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Small aluminium horn blue (2pcs)
1 x Horn for flap control (1 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Horn 5/10 with M2 Bearing
3 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon fiber rod 1.5 mm x 2000 mm
2 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x Ventus 1:4 set of instruments
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Glases Moritz
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
2 x Ball link M3 (6 uds)
1 x Ball link M2,5 (10 pcs)
1 x Angled clevis with threaded rod M3
1 x Cable coupler M3 (10 uds)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Short ball link M1.6 (6 uds)
1 x Cabel "Y" 30 cm (graupner)
1 x "Taxi Tank" Fuel Tank
1 x Soporte metal para servos
1 x Piñones SAVOX SH-0350
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Servo KST X08 Plus 9g HV servo
1 x Servo Tester
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Gear for MICRO BB
1 x Servo GO-1013 MG 3.8kg
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Servo HITEC HS-45 HB
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Support Filtro FESTO
1 x Servo BMS-4112
1 x Support pump Xicoy X45
1 x Servo HITEC HS-311
1 x Servo HITEC D-955 TW Titanium
1 x ABS tube 6.0x5.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Small control horn with bearing (2 pcs)
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Short adjustable control horn 3x24
1 x Horn DUBRO 1/2A
1 x Balsa panel 2.0x100x1000 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Indoor hinge with servo arm integraded
1 x Birch plywood plate 600x300x4.0 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x Control horn long w/ball
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Extra long horn 60x30
2 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Jeti Black cap
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Servo FUTABA BLS172 SV
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x PHASOR RACE 2035/2100 2D
2,220.35EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies