119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Double conector with JR adapter and 200 mm extension
1 x APM2.6 Power module with 5.3V DC BEC
2 x CC 01
2 x 4 LiPo XH>EH adapter
1 x Circlick securite
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cabel charger transmitter GRAUPNER
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x CC 05
1 x CM-3
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x CC 02
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x BEC 3A FOXY
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 30 cm BEC cable (female)
1 x 5 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x Cabling for Fox MDM1 wings
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Connector Sub-D 2+5 Male
1 x Connector Sub-D 2+5 Female
2 x 30 cm BEC cable (male)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x DPSI magnetic switch actuator (housing)
1 x Switc electronic 30 Amp
1 x SPS 70V 100/200 A
1 x Multi-adapter balancer JST/C - TP
1 x Extension 2/3 lipos JST/C
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x MAX BEC 2
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Pins M connect Multipin connectors AWG 20-24
1 x SBEC 40
1 x JETImodel DPS 40
1 x SPS 70V 140/280 A
1 x Extension 5 lipos JST - JST/C
1 x PSC 6
1 x Extension 6 lipos XH > EH
1 x Opto Gas Engine Kill Switch
1 x Electronic switch JETI SP06 Opto
1 x Extension 5 lipos JST/C
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Interruptor SPS 70v 60/120A
1 x MAX BEC
1 x PowerBox SparkSwitch RS
1 x Electronic switch JETI SP6 0-15v/6A
1 x SWTU2 switch
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Male Prolonger TP 4/5S
1 x Extension 5 lipos JST/C - JST
1 x SBEC 30 D
1 x Magnetic Interruptor MULTIPLEX
1 x 20 g tin paste
2 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Spray adhesive AEROFIX 2
1 x Spray Graphit 33
1 x Hobbylite Filler, Balsa colour
2 x 500 ml sealer (DOPE)
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Universal Colour Paste white 50 g
2 x 
2 x Partall paste 650 g
1 x Plasti Dip Liquid Tape 429 ml black
1 x Spannlack 1000 ml
2 x Extractor piñones 2.3/3.2 mm
1 x DYNAMOMETER S-1580
1 x Optical RPM Sensor
1 x Connector CAN 15
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x 2 LiPo XH>EH adapter
1 x Recessed MPX connector support (6 pcs)
1 x Support Pitot JETI
1 x DJI Mavic Air Fly More Combo
1 x Support XT60 conector (2 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Selfstart electronic switch
1 x Suncover 100cc Red
1 x MAX BEC 2D plus EX
1 x Opto Gas Engine Kill Switch
1 x 1000 ml sealer (DOPE)
1 x Spray YELLOW Inca Lexan 150ml
1 x ESC ALPHA 60A HV
1 x Solvent Plasti Dip 1000 ml
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Plasti Dip Liquid Tape 429 ml black
1 x AXI 2204 Multicopter
1 x Universal Colour Paste deep black 50 g
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Extension 2/3 lipos JST - JST/C
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Fibreglass-Spinner BS ∅155 x 200 mm
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x Spinner plastic black fixed propeller 30 mm
1 x 42 mm black plastic spinner for fixed propeller
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x 36 mm black plastic spinner for fixed propeller
1 x Spinner INO 89 mm Chrome (Imitacion metal)
1 x 102 mm INO spinner (carbon imitation)
1 x 45 mm black plastic spinner for fixed propeller
2 x Blades 330mm
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Servo SAVOX SA-128S SG
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support ECU Xicoy X-45
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
5,356.36EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies