119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Paramotor Trike XL
2 x Aramid 50 daN 50 m
1 x Windsock Ozone L -1200 mm
2 x LUCAS pilot ARTF
3 x Windsock Ozone L - 700 mm
1 x Para-RC Trike "RC-Bullix"
2 x Rescue 1,8m2 / BackPack
1 x Paramotor BackPack XXS (without accessories)
1 x Parachute PV6 for F3J
1 x Set cintas unión paracaídas 145 cm
1 x Paramotor BackPack XXS 2
1 x Parachute P4
1 x Ballast 700gr OPALE
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x Trike XL motor set (motor+esc+prop)
1 x Wing OXY 0,5 pulgadas2
2 x Para-RC "RC-Evo-Cross" Rescue
1 x Fiberglass heat shield Ø 4 mm 1000 mm
2 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Horn 6/20 with M3 Bearing
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x SIMtransmitter 6 Mode 2
1 x DPS Switch JR/JR
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Cable tie mounts 4.3 (4 uds)
1 x ABS tube 8.0x7.0x1000 mm
1 x 3 mm Long Prop Adapter M5
1 x ABS tube 5.0x3.0x1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Interface Realflight Simulator
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x ABS tube 4.0x3.0x1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Cabin latch Fox MDM1 4m (pair)
3 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x CC 01
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x Dean "T" - Futaba Adapter
1 x 
1 x Connector CAN 15
2 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x Cable grommet Ø 5 mm (4 uds)
1 x Cable grommet Ø 4 mm (4 uds)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Buy Perforated film 100 cm / 20 m
1 x Brass control horn M2 large for wire (2pcs)
1 x ABS tube 14.0x10.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Xplorer4 anemometro
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Black large kwik link (10 pcs)
1 x Medidor ángulos y/o incidencias
1 x Profile ABS half cane 6.0x1000 mm
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Parachute BACKUP X100
2 x MAX pilot ARTF
1 x Para-RC Mix
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Motor mount EDGE 540 48"
1 x Adjustable launching hook
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x BULL MØ1 2.600mm "McLAREN-GULF"
1 x 3,2 mm Prop Adapter M5
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Threaded coupler M3 (10 uds)
1 x PROFI Box JETI
1 x 4 mm Prop Adapter M6
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x 3 mm Short Prop Adapter M5
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Lock washer 2.2 mm (20 pcs)
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x Locking cable tie 3.2x142 (uds)
1 x 2,3 mm Prop Drive Günther M4
1 x Adapter 3,0 mm M8
1 x Lock washer 2.7 mm (20 pcs)
1 x ABS 500 x 400 x 1 mm (white)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Wheel cover holder Ø 6 mm (2 uds)
13,462.49EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies