Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » POWER6600

69.00EUR

PowerBox SparkSwitch RS
[POWER6600]

Product description
The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V ignition systems. The SparkSwitch RS enables the user to switch the ignition on and off conveniently from the transmitter. The switched state can be checked at any time using the external LED or a telemetry status message. These features of the SparkSwitch RS enhance operating safety as well as simplifying the handling of petrol engines. In an emergency - such as the failure of a throttle servo - the SparkSwitch RS can be used to stop the engine quickly.
An important feature is galvanic separation between the receiving system and the ignition system. The switching process as well as RPM feedback from the ignition unit are optically isolated from the receiver. This ensures that a fault in the ignition system shielding, or any other defect, cannot cause interference to the sensitive receiving system.
The RPM (rotational speed) monitor input can be connected directly to the Tacho output of the ignition unit - if present. If your ignition system does not include a Tacho socket, we can supply a separate sensor RPM-Probe which can be connected in parallel with the Hall sensor. The RPM data can be transferred to any of the current telemetry systems: the SparkSwitch RS automatically detects the system in use, eliminating the need for adjustments using the USB interface.
The SparkSwitch RS can be supplied in either of two variants: with or without voltage regulation. The regulated variant reliably reduces the input voltage (max. 9.0V) to 6.0V. The version without voltage regulation passes the full voltage (max. 13.0V) through.

Features
Optical separation between the receiving system and the ignition system
External LED switch status indicator
Regulated (6.0V) or pass-through output voltage
RPM monitor for all current telemetry systems
Telemetry function for PowerBox, Jeti, Futaba, Graupner, Multiplex, Spektrum, JR
Failsafe mode
Machined aluminium heat-sink
Compact, low-profile format

Technical Data
Operating voltage 4.0 to 12.6V
Current drain Power-on state 19mA
Current drain Standby 0.2μA
Maximum load current max. 2A
Output voltage 6,0V / unregulated
Signal input PWM
Dimensions 56 x 29 x 10 mm
Weight 15 g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Motor DLE 170 M- Paramotors
2 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 430 cc - Paramotors
2 x	Small Crow DLE-170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Electric spoiler 185 mm (2 pcs)
1 x
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon plate 350x150x3.0 mm
1 x	Giant Scale Muffler D.A. 70
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	LIBELLE Standard 3.8m D-box H-201
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	GP 15 JETA
1 x	ASK 21 6.5m + pylona
1 x	DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x	Para-RC Mix
1 x	Trike XL motor set (motor+esc+prop)
1 x	Windsock Ozone L -1200 mm
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Tow hook for tug
2 x	Horn mando small (2 pcs)
1 x	Extractor piñones 2.3/3.2 mm
1 x	5 mm M2 variable inclined horn
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	2,4x1000 mm 2:1 black termoretract tube
1 x	45 mm black plastic spinner for fixed propeller
1 x	Oracover Black 10 m
1 x	2 mm female connector (2 pcs) with safety connector
2 x	PPM Encoder Module
1 x	Field folding model stand SebArt
1 x	Angle measurer
1 x	Parachute expulsion foam
1 x	Round Rod 4,0x1000 mm
1 x	36 mm black plastic spinner for fixed propeller
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Horn 6/20 with M3 Bearing
1 x	Balsa panel 2.5x100x1000 mm
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	55% silver electrodes (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	SE Ring 200 mm (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Smoke set "M"
1 x	Horn mando long (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	Propeller balancer
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	DPSI Ampere battery backer
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	TX 250 mW especial GOPRO
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cockpit plastic closing
1 x	Steering arm 12 mm Ø 4 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	SUS wire 3m (nylon coated)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Locking cable tie 3.2x142 (uds)
1 x	SIMtransmitter 6 Mode 2
1 x	Oil FUCHS 1 liter
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	DG-303 ACRO 3750 mm, canopy
1 x	Interface Jack Adapter IKARUS
1 x	EasyFLY Addon
1 x	Z Bender - S Type Tool
1 x	Ball Link Plier
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	MAX pilot ARTF
1 x	Parachute PV6 for F3J
1 x	Field folding model stand
1 x	Spikes Band (5 m)
1 x	Fixed launching hook
1 x	Foil for sticking flaps and ailerons
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Green smoke canister 100 g
1 x	B4-0 rocket charges (6 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Initior Receiver FRX2 Wireless
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	White smoke canister 100 g
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	100 mm rods + T patellas set for direction control
1 x	Lead with adhesive (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Multi-adapter balancer JST - TP
1 x	SPS 70V 140/280 A
1 x	90 mm rods + T patellas set for direction control
1 x	Magnetic Interruptor MULTIPLEX
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Angle of incidence meter
1 x	Tube Pitot to PIXHAWK
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	ABS Strip 1.0x4.0x1000 mm
2 x	12,7x1000 mm 2:1 green termoretract tube
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Blue smoke canister 100 g
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	45 mm white plastic spinner for fixed propeller
1 x	Tape GFK 25 mm
1 x	Towing hook
1 x	15 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Towing hook <3m
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Oracover Brown 2 m
1 x	Remote electric ignition system
1 x	Smoke set "S"
1 x	SERVO HOLDER
1 x	SE Ring 450 mm (2 pcs)
1 x	Yellow smoke canister 65 g
1 x	50 mm white plastic spinner for fixed propeller
1 x	Round Rod 2,0x1000 mm
1 x	AX-60 starters (5 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	PropCover 16-20" (2 pcs)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Cinta Goldfix 1m
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Medium pin type hinge (12 uds)
1 x	Control horn long w/ball
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Electric rocket starters (6 pcs)
1 x
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Round flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Red smoke canister 100 g
1 x	Interruptor SPS 70v 60/120A
1 x	Snap for floding prop for 2 mm axi
1 x	Extension 5 lipos JST - JST/C
1 x	28x5 mm wires output (2 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	MPS Gas-Cap-Powerswitch

28,770.43EUR