119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Wing OXY 5,0 m2
3 x Para-RC Trike "RC-Bullix"
3 x Set cintas unión paracaídas 145 cm
1 x Parachute BACKUP X100
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Paramotor Kit Camo H1.5/ Ben Red
2 x Coversion set HIROBO EX/EAGLE elektro
2 x Motor mount EDGE 540 48"
2 x Metalic nose for PROJETI
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Crystal Universal RX 35.070 Ch 67
1 x EasyFLY Addon
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
2 x Paramotor Trike XL
1 x Parachute P4
1 x MAX pilot ARTF
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x KAVAN Hand crank fuel pump
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Black "FUEL VENT" round aluminum overflow socket
1 x 1000 ccm complete gasoline fuel tank
1 x Ballast 700gr OPALE
2 x Rescue 1,8m2 / BackPack
2 x Para-RC Mix
2 x Swashplate metal LAMA
1 x Shaft sleeve LAMA
1 x Blade holder metal LAMA
1 x Carbon blade 230 mm
2 x Flybar support metal LAMA
1 x Dremel PERMAGRIT thin lime
2 x Glow Plug Clip 1.3 Ah
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Support Flush MPX Conector (6 pcs)
1 x Extension silicon 30 cm male (Graupner)
1 x Extension lead 15 cm Multiplex
1 x Futaba Female 40 cm extension
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Prolongador S-Bus JR/JR 20cm
1 x Balsa panel 5.0x100x1000 mm
1 x 38x4,5 mm wires output (2 pcs)
1 x Cable grommet Ø 5 mm (4 uds)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x 45 mm rods set for direction control
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Short ball link M1.6 (6 uds)
1 x BALSA trip 4.0x4.0x1000 mm
1 x Cap closure 33/23.5mm (2 uds)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Optical RPM Sensor
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Pin hinge 26x11 mm (10 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Oracover Brown 2 m
1 x BALSA trip 3.0x5.0x1000 mm
1 x Cabel "Y" 30 cm (Futaba)
2 x Soporte grifo FESTO (2 pcs)
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Large flex hinge (12 uds)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x MYLAR film A350 (1000x500 mm)
1 x Allen wheel collar M3x5
1 x Oracover light Grey 2m
1 x Cable tie mounts 4.3 (4 uds)
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x PPM Encoder Module
1 x CM-3
1 x Compact on-board starting system (9724)
1 x PowerBox Smokepump JETs 2x outside
1 x Selfstarr EME35
1 x BEC 3A FOXY
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Deposito SECRAFT V2 1000 ml Gas
1 x PowerBox Smokepump
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Compact on-board starting system (9713)
1 x Cabling for Fox MDM1 wings
1 x Interface Jack Adapter IKARUS
1 x Variable Flow Smoke Pump System
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Compact on-board starting system (9512)
1 x Buy Perforated film 145 cm / 50 m
1 x Hopper 125 ml XICOY
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Deposito DUBRO 3000cc-100oz
1 x ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS
1 x FESTO connector 1/8 Quick 6mm 90º
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Y-Hose connector 4-4-4mm
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Deposito DUBRO 360 ml - 12 oz
1 x Check valve quick hose connector 4-4 mm
1 x Pendulum glow tank
1 x LUCAS pilot ARTF
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Support XT60 conector (2 pcs)
1 x 800TVL CMOS camera for FPV
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x WingFix ULTRA Black Edition
1 x Foam plastic plates (310x210x8 mm)
1 x PSC 5
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x MAX BEC 2
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Propeller balancer
1 x Fiberglass plate 1200x1000x0,2 mm
1 x FESTO connector M7 Quick 4 mm
1 x FESTO connector M7 barb fitting 6mm
1 x T-Hose connector 4-4-4mm
1 x FESTO connector M5 Quick 6 mm
1 x Y-Hose connector 2-2-2 mm
1 x Hopper 125 ml XICOY with support
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x T-Hose connector 3-3-3 mm
1 x Hopper UAT Sebar 400 ml
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Soporte filtro FESTO (4 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Prolonguer for Balancer Thunder Power 6S
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 25 mm reinforced hinge
1 x Propeller balancer
1 x Foam plastic plates (310x210x2 mm)
1 x Straightened rod Ø 0.5 mm x 1000 mm
10,389.19EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies