119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Oratex White 2m
1 x Q-12 X-light 2000 mm Electric
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x 1/12 Pilot "Fighter"
1 x Piloto JET 1:3,5
1 x XH female balance (5S) connector (2 pcs)
1 x Propeller balancer
2 x Spring lock washer 2.6 mm (20 pcs)
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Adapter lead MPX/XT60
1 x TrainerCord (master-learner)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x JETImodel SINGLE BEC
2 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x 20 mm carbon horn
1 x BALSA trip 5.0x5.0x1000 mm
1 x Spikes Band (5 m)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x BALSA triangular 8x8x1000 mm
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x BALSA triangular 15x15x1000 mm
1 x Angled clevis with threaded rod M3
1 x Optical RPM Sensor
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x M3 Maxi ball link (2 uds)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Ball link M3 (10 pcs, flat ball)
1 x Couple M4 for wire (10 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Ball link M3 RPA's-UAV's
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Joint with bearing M2,5 22x5,5
1 x Long ball link M3 (6 uds)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x CC 11 Conector
1 x 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x Cierva C30 Elevator
1 x Head lower part New
1 x Balls 4 mm
1 x Screw M3x16
1 x Cierva C30 simulated motor
1 x Head core
1 x Head runner
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Glases Aspen
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x ER40eVo set B (20 Kg)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Tube Pitot to PIXHAWK
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Kit hydraulic brake
1 x Flat washer 4.3 mm (20 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x DPSI Ampere battery backer
1 x CC 03
1 x Z type of cable coupler Ø 2 (2 uds)
1 x PPM Encoder Module
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Blind nut M6 (4 pcs)
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Tapping Screw M2.2x65 (10 pcs)
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Pan head screw M2x16 PH
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Hexagonal Nut M2 (10 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Socket Screw M2x3 mm (4 pcs)
1 x Pan Head Screw M2x8 PH
1 x Lock washer 2.2 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Pan Head Screw M2x8 PH countersunk head
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Quicklock washer 1 mm (10 pcs)
1 x Brake for 140 mm wheels
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Flat washer 3.2 mm (20 pcs)
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Socket Screw M3x9 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Blind nut M5 (4 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Connector CAN 15
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x BEC 3A FOXY
1 x Connector Sub-D 2+5 Male
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Battery charging cable XT60
1 x 3 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 30 cm BEC cable (male)
1 x Dean "T" - Futaba Adapter
1 x Connector Sub-D 2+5 Female
1 x Circlick securite
1 x CC 01
1 x 2 LiPo XH>EH adapter
3,186.21EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies