Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock
Ball link M3 RPA's-UAV's temporarily out of stock	DUPLEX R18 EX 2,4GHz + Rsat2 temporarily out of stock	Servo Mount M (blue) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Bungee HLG Premium
1 x	Slave-cable USB Easy Sim
1 x	EasyFLY Addon
1 x	6 mm red aluminium threaded horn with patella
1 x	20 mm carbon horn
1 x	Horn 6/27 with M3 Bearing
2 x	Horn 20x28,5 mm (2 pcs)
2 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Adjustable brass horn threaded M3
1 x	Horn 6/20 with M3 Bearing
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn mando long (2 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Cable with accesories
2 x	Extra long horn 60x30
1 x	6 mm M3 variable horn
1 x	6 mm M3 variable inclined horn
2 x	Brass control horn M4 short for wire (4 pcs)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Connector CAN 15
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
3 x	Connector Sub-D 2+5 Male
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	DPSI Ampere battery backer
1 x	30 cm BEC cable (male)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	DPS Switch JR/JR
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Dean "T" - Futaba Adapter
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	30 cm BEC cable (female)
1 x	Extension silicon 25 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	20 g tin paste
2 x	Control horn long w/ball
2 x	Horn F3A de Titanium 16 mm (2 units)
1 x	PowerBox SparkSwitch RS
1 x	Female connector for 16 pines AWG
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	FX three-position switched channel, long
1 x	SBEC Jeti
2 x	USB Interface Adapter
1 x	Indoor hinge with servo arm integraded
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Rudder forward 80x28 "type Kato"
1 x	RH long aluminium horn (2pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Micro control horn T2 Ø 1
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
2 x	Long adjustable control horn with bearing
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Small aluminium horn red (2pcs)
2 x	Horn DUBRO 1/2A
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	5 mm M2 variable inclined horn
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Car Charger DC/DS-16
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Extension 5 lipos JST/C - JST
1 x	MPS Gas-Cap-Powerswitch
1 x	SWTU2 switch
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Male Prolonger TP 4/5S
1 x	Male connector for 16 pines AWG
1 x	Switching module high voltage SXH
1 x	EWC3 100 cm wing connector
1 x	Male connector for 6 pines AWG
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	SPARK Switch 12v
1 x	Short Switch On/Off micro
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Spinner 82mm Black ventilado
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	45 mm rods set for direction control
1 x	Long adjustable aluminium control horn 2,8x24
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Canopy Astra
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	102 mm INO spinner (carbon imitation)
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	75 mm INO spinner (carbon imitation)
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	LightBox SR
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Motor mount M
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	6 mm aluminium horn with patella
1 x	Long adjustable control horn 3x34
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Electric spoiler 440 mm (2 pcs)
1 x	13 mm wing servo holder
1 x	Canopy Sweet / Siesta
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
2 x	PWC4 wing/fuselage connector for 4 servos
2 x	Three-position switched channel, short

5,456.44EUR