1 x | Tape GFK 50 mm |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Foil for sticking flaps and ailerons |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Ball link M3 RPA's-UAV's |
3 x | 20x1000 mm Ring Strap Back To Back |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | SE Ring 240 mm (2 pcs) |
2 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Socket head ball link M3 (2 uds) |
1 x | Spikes Band (5 m) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Ball link M1.6 (6 uds) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Ring 320 mm length (5 pcs) |
2 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
2 x | M3 Maxi ball link (2 uds) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Short ball link M3 (6 uds) |
2 x | SE Ring 250 mm (2 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Long ball link M2 (6 uds) |
1 x | Tape GFK 38 mm |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
3 x | SE Ring 480 mm (2 pcs) |
1 x | Short ball link M2 (6 uds) |
2 x | Extension silicon 30 cm female (Futaba) |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Premium servo extension 25cm |
3 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Prolongador S-Bus JR/JR 20cm |
1 x | Bungee HLG Premium |
1 x | Ferrita 27x14x7 mm |
1 x | Windsock Ozone L -1200 mm |
2 x | Parachute P4 |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Windsock Ozone L - 700 mm |
1 x | Ferrita 17x10x6.5 mm |
2 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Trike XL motor set (motor+esc+prop) |
2 x | Paramotor BackPack XXS 2 |
1 x | MAX pilot ARTF |
1 x | Ballast 700gr OPALE |
2 x | Wing OXY 0,5 pulgadas2 |
1 x | Opale Rucksack |
2 x | Parachute PV6 for F3J |
1 x | Parachute BACKUP X100 |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Wing OXY 5,0 m2 |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | 30 cm BEC cable (female) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | T-Motor U7-V2.0 Kv420 |
2 x | Support FUEL DOT V3 |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | M3 Maxi ball link (2 uds) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Tren de cola carbono 50-70cc |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
2 x | Mudguard wheels 112/127 mm |
1 x | Circlick securite |
1 x | Futaba Female 40 cm extension |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
3 x | SE Ring 360 mm (2 pcs) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Futaba male 40 cm extension |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Indoor hinge with servo arm integraded |
1 x | Large flex hinge (12 uds) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Medium pin type hinge (12 uds) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Long pinned hinge (6 uds) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Gates hinge |
1 x | Micro flex hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Metal clevis M2 (10 uds) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | SWTU2 switch |
2 x | SBEC Jeti |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | SBEC 30 D |
1 x | PSC 5 |
2 x | MAX BEC 2D plus EX |
2 x | ESC ALPHA 60A HV |
2 x | HBC 10035-3 32-Bit |
2 x | Support Flush MPX Conector (6 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
2 x | Rescue 1,8m2 / BackPack |
1 x | Vasa model Catapult |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
1 x | Turbina XICOY X180 light |
2 x | Set freno para ruedas Dia. 127 mm |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Turbina X132 H "Compact Version" |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | SPS 70V 100/200 A |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Small flex hinge (12 uds) |
2 x | Support ECU Xicoy X-45 |
1 x | CC 11 Conector |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Support Pitot JETI |
1 x | Aluminium ignition bad (red) |
1 x | Compact on-board starting system (9724) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Tacometer mini ignition RCEXL |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Propadapter for motor A50-V3 |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Angle support XT60 conector |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Fast attachment for servos (25 pcs) |
1 x | GLOW 5C + accesories |
2 x | Ball Link ALU M3 - RH (1 pcs) |
2 x | Hose clips 6 mm |
2 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | SPS Remote switch actuator |
1 x | DLE Ignition unit |
1 x | MIG 29 3D RTF, Servo |
1 x | Compact on-board starting system (9713) |
1 x | Retract undercarriage |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | EME 55 cc carburetor WALBRO |
1 x | Black large kwik link (10 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Metal ring front FEMA |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | MAX BEC |
1 x | MAX BEC 2 |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Micro Switch button |
1 x | SPS 70V 140/280 A |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Extension Arm for Carburetor (red) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Reed valve for DA 50-R |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Extension Arm for Carburetor |
1 x | DLE 55 carburetor |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | SAITO FG-36 carburetor |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Axle wheel with accesories |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Cable coupler M2 (10 uds) |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M3 (10 uds) |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | SPARK Switch 7.4v |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | UBEC 6A KAVAN |
1 x | SPARK Switch 12v |
1 x | Three-position switched channel, short |
1 x | SBEC 40 |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | USB HLS prog. interface |
1 x | Multi-adapter balancer JST - TP |
1 x | Selfstart electronic switch |
1 x | Switc electronic 30 Amp |
1 x | PowerBox SparkSwitch RS |
1 x | MPS Gas-Cap-Powerswitch |
1 x | PSC 6 |
1 x | Multi-adapter balancer JST/C - TP |
|
22,036.22EUR |