119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Rotor Mast
2 x Blade holder upper
1 x Battery plate
2 x Nut M2
2 x Tail support (2 pcs)
2 x Motor wall
1 x Head runner
1 x Ball joint long
2 x Screws flush mount M2
1 x Blades 330mm
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Blade holder center
2 x Servo Fork
1 x Screws M1,6x6 Allen
1 x Baering 3x8x4
1 x LA500 Autogyro
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Propeller set 400 (2R+2L)
1 x Support Flush MPX Conector (6 pcs)
1 x Glases Moritz
1 x PT 22x10 EL Propeller
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Head spacer
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x White smoke canister 140 g
1 x 6 mm M3 variable inclined horn
1 x White smoke bombs AX-60 (5 pcs)
1 x Propeller 10x4,7 SlowFlyer
1 x Ball link Aluminio M3 (2 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x Smoke set "S"
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x PT 21x13 EL Propeller
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Towing hook
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ferrita 27x14x7 mm
1 x Wheel keeper washer
1 x Remote electric ignition system
1 x Head upper part
1 x PPM Encoder Module
1 x Horn 6/27 with M3 Bearing
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Propeller 12x6 Falcon electric
1 x Recessed MPX connector support (6 pcs)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x 30 cm BEC cable (female)
1 x 2 LiPo XH>EH adapter
1 x Head lower part New
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Horn with ball 40x30
1 x Soporte filtro FESTO (4 pcs)
1 x Blade holder center GFK 0,5 mm
1 x AX-60 starters (5 pcs)
2 x Soporte grifo FESTO vertical (1 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Brass control horn M2 large for wire (2pcs)
1 x Balls 4 mm
1 x White smoke bombs AX-18 (5 pcs)
1 x DPSI Ampere battery backer
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Xoar Electric Beechwood Prop 22x10
1 x "M" set
1 x PT 21x13 EL Propeller 3 Blade
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x LOWER TOW HOOK
1 x Cable coupler M2x66 (2 uds)
1 x Green smoke canister 140 g
1 x DPSI magnetic switch actuator (housing)
1 x Head lower part
1 x Support pumb/filter Xicoy X45
1 x Angle support XT60 conector
1 x Adjustable launching hook
1 x Adapter lead MPX/XT60
1 x Support ECU Xicoy X-45
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Spray Graphit 33
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Spray YELLOW Inca Lexan 150ml
1 x Profile ABS half cane 8.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x 20 g tin paste
1 x Ball link M3 (6 uds)
1 x Beech dowels 4.0 x 1000 mm
1 x Propeller electric carbon 6.5x4
1 x Short ball link M2 (6 uds)
1 x Hobbylite Filler, Balsa colour
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Short ball link M1.6 (6 uds)
1 x Extension silicon 75 cm (Futaba)
1 x Propeller electric carbon 10.5x8
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Propeller POWER-PROP 14x9 Izda
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Porpeller HUNTER 480
1 x 15 mm reinforced hinge
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x DJI FPV Combo
1 x Combo 4 pcs AXI 2204 Multicopter
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Buy Perforated film 100 cm / 10 m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Horn mando small (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x 3-blades 27x12 carbon prop Super Silence
1 x Y-Hose connector 6-6-6 mm
1 x Switching module high voltage SXH
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Landing gear strap large (4 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x 18 mm wing servo holder
1 x Three-position switched channel, short
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x Servo HITEC D951 TW
1 x Servo HITEC D85 MG
1 x CC 01
1 x Dean "T" - Futaba Adapter
5,196.52EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies