119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 200cc Std
1 x BOEING 727, Electric brake 28mm + controller
1 x MIRAGE 2000 Camuflage PNP
1 x RANGER Jet NAVY 1.854mm combo
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x PC-21 2880 mm Electric Landing Gear
1 x Boeing (TX) T-7A RED HAWK
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Horn 6/27 with M3 Bearing
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Small aluminium horn blue (2pcs)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Horn 6/35 with M3 Bearing
1 x 6 mm blue aluminium threaded horn with patella
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Field folding model stand
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Covered closure or fairings
2 x Locking cable tie 2.5x100 (uds)
1 x Cockpit plastic closing
1 x Cap closure 33/23.5mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Medidor ángulos y/o incidencias
1 x Stainless steel cable Ø 0.5 mm (10 m)
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Propeller balancer
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
2 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Angle of incidence meter
1 x Surface Indicator Gauge Small
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Angle measurer
1 x One touch canopy lock
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x Canopy Latch
1 x Field folding model stand SebArt
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Locking cable tie 3.2x142 (uds)
1 x TP/TopFuel - XH 2/3S Adapter
2 x Battery charging cable XT60
2 x 5 LiPo XH>EH adapter
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x CC 01
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Horn for flap control (1 pcs)
1 x 6 mm aluminium horn with patella
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x SlowFlyer control horn (3 pcs)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Horn 5/15 with M2 Bearing
1 x Horn 5/20 with M2 Bearing
1 x RH long aluminium horn (2pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (male)
1 x 30 cm BEC cable (female)
1 x Horn with ball 55x40
1 x 20 mm carbon horn
1 x MPX-Dean "T" Adapter
1 x Brass control horn M2 short for wire (2 pcs)
1 x 4 LiPo XH>EH adapter
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Cabel charger transmitter GRAUPNER
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Cable with accesories
1 x Horn 13,5x16 mm (2 pcs)
1 x USB HLS prog. interface
1 x 6 mm red aluminium threaded horn with patella
1 x CC 03
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Adapter lead MPX/XT60
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Horn with ball 40x30
1 x Brass control horn M4 short for wire (4 pcs)
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x Tire ODYSSEY Ø 89mm
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x SCHOCKJET ARF 2.050 mm
1 x Propeller Pleg CAM Carbon 14x7
1 x Propeller Pleg CAM Carbon 15x8
1 x Propeller Pleg CAM Carbon 10x7 Reverse Rotation
1 x Propeller Pleg CAM Carbon 10x7
1 x Propeller Pleg CAM Carbon 16x13
1 x Propeller Pleg CAM Carbon 15x13
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x Tank Kevlar ASPIRE 6 L Kero
1 x DPSI Ampere battery backer
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x resin-hardener L-385 H-385 (1250 g)
1 x CC 02
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW)
1 x Extension 5 lipos JST/C
1 x 90 mm rods + T patellas set for direction control
1 x Magnetic Interruptor MULTIPLEX
1 x SBEC 30 D
1 x 6 mm M3 variable horn
1 x EWC6 40 cm wing connector
1 x Micro Switch button
1 x Male connector for 6 pines AWG
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Switching module high voltage SXH
1 x Male connector for 12 pines AWG
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Propeller POWER-PROP 7x7
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Class 30, Red wheel pants (SebART)
1 x Double conector with JR adapter and 200 mm extension
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Allen wheel collar M4x6
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x SPARK Switch 5.9v
1 x UBEC 6A KAVAN
1 x MB-339 Aermachi 84" ARF c/retractil electric
1 x Metal ring front FEMA
1 x Dean "T" - Futaba Adapter
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x resin-hardener L-385 H-385 (625 g)
1 x 3 LiPo XH>EH adapter
23,870.65EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies