Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units
MPS Gas-Cap-Powerswitch few units	Cyano SUPER - GOLD™ (12g) few units	Propeller MENZ-S 18x8 few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

AXI 2820/12 CYCLONE
142.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	1/12 Pilot "Tom"
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/6 Pilot "Buddy"
1 x	Metal clevis M2 (10 uds)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Cable coupler M2,5 (2 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Cable coupler M3 (10 uds)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
3 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Cable coupler M3 (10 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Angled clevis with threaded rod M3
1 x	Kwik link with arm M3xM2xL24
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Metal ball clevis M3 (10 uds)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	100 mm rods set for direction control
1 x	90 mm rods + T patellas set for direction control
1 x	140 mm rods + T patellas set for direction control
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	100 mm rods + T patellas set for direction control
1 x	45 mm rods set for direction control
1 x	Cable tie mounts 4.3 (4 uds)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	80 mm rods set for direction control
1 x	11 mm Rubber pads (14 pcs)
1 x	41x5,5 mm wires output (2 pcs)
2 x	Vasa model Catapult
1 x	Allen wheel collar M3x3
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
2 x	CC 01
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (female)
1 x	DPS Switch JR/JR
2 x	Dean "T" - Futaba Adapter
2 x	CM-3
1 x	Adapter lead MPX/XT60
2 x	BEC 3A FOXY
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabling for Fox MDM1 wings
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
3 x	Connector CAN 15
2 x	30 cm BEC cable (male)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	6 mm M3 variable inclined horn
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn with ball 40x30
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Horn mando small (2 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Cable control set
1 x	Horn DUBRO 1/2A
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Control horn long w/ball
1 x	5 mm M2 variable horn
1 x	Horn mando long (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Adjustable brass horn threaded M3
1 x	Horn 6/20 with M3 Bearing
1 x	Extra long horn 60x30
1 x	Horn 13,5x16 mm (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Cable with accesories
1 x	Piloto JET 1:3,5
2 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/7 Pilot "Japanese"
1 x	1/6 Pilot "Garry"
1 x	1/6 Pilot "Tony"
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Piloto jet 130 mm
1 x	Pilot "Anthony" (Slimline)
1 x	1/12 Pilot "Fighter"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	1/10 Pilot "Jack"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	1/12 Pilot "Cougar"
1 x	1/6 Pilot "Cindy"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Tube Pitot to PIXHAWK
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Green smoke canister 140 g
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Metal clevis M2,5 (10 uds)
1 x	Adapter 3,2 mm M8
1 x	Locking cable tie 4.6x203 (uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Adapter 3,0 mm M8
1 x	Locking cable tie 3.2x142 (uds)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Pushrod octagone 3/2
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Canopy Latch
1 x	T-Motor U7-V2.0 Kv420
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	4 LiPo XH>EH adapter
1 x	SPS 70V 100/200 A
1 x	SBEC Jeti
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Selfstart electronic switch
1 x	SPARK Switch 12v
1 x	PowerBox SparkSwitch RS
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	PSC 5
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Female connector for 10 pines AWG
1 x	Hacker X-Pro USB interface V2
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Female connector for 16 pines AWG
1 x	MAX BEC 2
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Switching module high voltage SXH
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Connector Sub-D 2+5 Female
1 x	Male connector for 20 pines AWG
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Circlick securite
1 x	PWC4 wing/fuselage connector for 4 servos

3,036.86EUR