119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CC 05
1 x CC 02
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Connector Sub-D 2+5 Female
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Connector Sub-D 2+5 Male
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x Cabel charger transmitter GRAUPNER
2 x Double conector with JR adapter and 200 mm extension
1 x DPS Switch JR/JR
2 x CM-3
1 x Dean "T" - Futaba Adapter
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 30 cm BEC cable (female)
1 x 30 cm BEC cable (male)
1 x 2 LiPo XH>EH adapter
1 x UBEC 6A KAVAN
2 x Connector CAN 15
1 x Cabling for Fox MDM1 wings
1 x APM2.6 Power module with 5.3V DC BEC
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x M3 black washers (4 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
2 x Lock washer 4.3 mm (20 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Flat washer 2.2 mm (20 pcs)
2 x Lock washer 2.7 mm (20 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x White smoke bombs AX-18 (5 pcs)
1 x White smoke bombs AX-9 (10 pcs)
1 x White smoke canister 100 g
1 x Red smoke bombs AX-60 (5 pcs)
2 x Blue smoke canister 100 g
1 x White smoke bombs AX-60 (5 pcs)
1 x Remote electric ignition system
1 x Smoke set "S"
2 x AX-60 starters (5 pcs)
2 x Parachute expulsion foam
2 x Smoke set "M"
2 x Black smoke bombs AX-60 (5 pcs)
2 x Green smoke canister 100 g
1 x Ventral support for AX-18/AX-60
1 x "S" set for boats
1 x Yellow smoke canister 65 g
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x PWC4 wing/fuselage connector for 4 servos
1 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
2 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Male connector for 6 pines AWG
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
2 x Liston HAYA 3 x 10 x 1000 mm
2 x Pine wood slat 3.0x10.0x1000 mm
2 x BALSA triangular 6x6x1000 mm
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x EWC6 40 cm wing connector
1 x Aluminium rod Ø 4.0 mm x 3000 mm
2 x BALSA trip 8.0x8.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x DPSI Ampere battery backer
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Cap closure 33/23.5mm (2 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Locking cable tie 3.2x142 (uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Steering arm 16 mm Ø 4 mm
1 x Motor DLE 200cc Premium Muffler
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Big Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
1 x Small Crow DLE-170M
1 x Horn 13,5x16 mm (2 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x ABS Strip 1.5x4.0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x 15 mm reinforced hinge
1 x 4 LiPo XH>EH adapter
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Hexagonal Nut M1,6 (10 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Threaded insert M4 (4 pcs)
1 x Blind nut M4 (10 pcs)
1 x Nut for mounting M5 (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x Screw M3x5 (10 pcs)
1 x Screw M2.5x20 (10 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Tapping Screw M2.2x13 (10 pcs)
1 x Hexagonal Nut M2.5 (10 pcs)
1 x AX-60 starters (5 pcs)
1 x Initior Receiver FRX2 Wireless
2 x Red smoke canister 140 g
1 x White smoke canister 65 g
1 x B4-0 rocket charges (6 pcs)
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x "M" set
1 x "S" set for planes
1 x Smoke set "Glider"
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x White smoke canister 140 g
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Red smoke canister 65 g
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x EWC3 40 cm wing connector
1 x Beech dowels 10 mm x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
2 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Linden wood slat 2.0x2.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Crystal TX 35.150 Ch 75
1 x Beech dowels 3.0 x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Blue smoke canister 140 g
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x M3-M4 rubber washer (8 pcs)
9,359.33EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies