119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Angle measurer
1 x Propeller balancer
2 x Truck-trailer for gliders 720 x 285 mm
1 x Field folding model stand
1 x Medidor ángulos y/o incidencias
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
2 x One touch canopy lock
1 x Steering arm 16 mm Ø 4 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x Steering arm 16 mm Ø 3 mm (2 uds)
2 x Screw-lock connector M2 (2 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x White silicone 0,25 mm² wire (25 m)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Green silicone 0,25 qmm wire (50 m)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
2 x 5 line servos wire black (1 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Propeller POWER-PROP 14x9
1 x LASER 73" 1.85m (05) PILOT
1 x Carbon fiber rod 20 mmx1000 mm
1 x Horn 5/10 with M2 Bearing
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Ball Link Plier
1 x ABS Strip 1.5x2.0x1000 mm
1 x Angle of incidence meter
2 x Snap short M2 (10 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Wheel collar 6 mm Ø (4 uds)
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Landing gear frontal support 25x32x16
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Snap pin for micro clevis (10 uds)
1 x Tip wing protector 28x10x12 (2 pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x 100m servo "Premium" wire (white/red/blue)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Propeller POWER-PROP 13x9
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Crystal Universal RX 35.140 Ch 74
1 x Crystal Universal RX 35.050 Ch 65
1 x Stickers-digit for marking
1 x Crystal TX 35.100 Ch 70
1 x Crystal Universal RX 35.070 Ch 67
1 x Crystal TX 35.180 Ch 78
1 x Receiver Crystal 35 Mc/s Ch 62
3,003.22EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies