119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Optical RPM Sensor
1 x DYNAMOMETER S-1580
1 x XH male balance (4S) connector (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x 2 mm male connector (2 pcs) with safety connector
1 x Gold antispark 4 mm plug
1 x Conector BEC female (10 pcs)
1 x XH female balance (3S) connector (2 pcs)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connector CAN 15
1 x Connectors banna oro 3 mm (M/F)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna oro 6,0 mm (M/F)
1 x XH female balance (4S) connector (2 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH male balance (3S) connector (2 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Optotronix Aurora Plug
1 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x MPX Sub-D Adaptor
1 x Conector BEC male (10 pcs)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
2 x Profile ABS Square 3 x 1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ABS angle 3,0x3,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
2 x ABS "T" angle 10.0x10.0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
2 x Profile ABS Square 4 x 1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x 5 line servos wire black (1 m)
1 x 28x5 mm wires output (2 pcs)
1 x "S" set for boats
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Monokote ROJO misil (1.8x0.65m)
1 x MR30 connector male
1 x 4 mm M3 red control terminal (4 pcs)
1 x ZENOAH ZG26 SCM Marine Engine
1 x ASW 15 5000 mm (Airwold)
1 x DLE 85 / DLE111 / DLE120 Prop Washer
1 x Fox MDM 1 4000 mm DeLuxe
1 x Fox MDM-1 ARF 3.5m Orange
1 x Gasket carburettor/insulator for ZG 38/S/SC
1 x ASG 32 560 mm
1 x Albatros ,spare fuselage (Top Model)
1 x Gracia (Top Model)
1 x Astra wing Joinner (Top Model)
1 x Stainless steel silencer for DA 150/150L
1 x Avia spare blue cockpit (Top Model)
2 x RM-130FSI 4-stroke inline gasoline airplane 3 cylinder
1 x RM-85FSI 4-stroke inline gasoline engine
1 x Chili Race F3K (aramid nose)
1 x Astra (Top Model)
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x 20x200 mm battery rings
1 x Light semi-synthetic Oil PUTOLINE TT (1l)
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x 1/12 Pilot "Fighter"
1 x Head Gasket 30cc (3 pcs)
1 x MVVS presuritation conection 26-175 cc
1 x MVVS exhaust gasket 26cc
1 x Motor UMS Radial-5-150cc gas
1 x Rear cover O-ring 26/30 cc
1 x Regler autostarter MOKIS250
1 x Carburator gasket MOKI
1 x Air filter MOKI
1 x Motor Moki S 400 cc 5 cylinders
1 x Moki Exhaust Bend 200 mm
1 x MOKI S250 Intake Bend
1 x Carburator Moki S250
1 x Baffles for Radial Moki S180/320 mm
1 x Escape Moki 100 BVT
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ
1 x Charger FUTABA SQN30W12P-08 220v
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Switch Cap M (silver)
1 x Maleta transporte FUTABA 10PX
1 x Switch Cap M (black)
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Tray for FUTABA 18 SZ
1 x Switch Cap M (blue)
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Spinner 42 mm EXTRA 330SC
1 x Interruptor On/Off Corto micro
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x 11 mm wing servo holder
1 x 
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x TMM 2512-3S heli
1 x Mini-Pix Esc 15 Amp
2 x Profile ABS half cane 4x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Program 5v SIO RS 232
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x LENTUS Multiplex Landig gear retract
24,493.73EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies