119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Beech dowels 4.0 x 1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Balsa panel 6.0x100x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x A/C quality beech plywood 498x247x1.2 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Beech dowels 3.0 x 1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 10x100x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x A/C quality beech plywood 498x247x2.0 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 4 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x CC 05
1 x Double conector with JR adapter and 200 mm extension
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 3 LiPo XH>EH adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x DPSI Ampere battery backer
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x DPS Switch JR/JR
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x BEC 3A FOXY
1 x Circlick securite
1 x Foil for sticking flaps and ailerons
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 
1 x SE Ring 330 mm (4 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x200 mm battery rings
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Tape GFK 38 mm
1 x SE Ring 360 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Spikes Band (5 m)
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Long pinned hinge (6 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Large flex hinge (12 uds)
1 x Motor DLE 170 M- Paramotors
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Ballast 700gr OPALE
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Buy Perforated film 100 cm / 50 m
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Air pressure gauge
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x UBEC 6A KAVAN
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Male Prolonger TP 4/5S
1 x SBEC 30 D
1 x Connector Sub-D 2+5 Male
1 x PowerBox Smokepump
2,795.99EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies