119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Control horn long w/ball
1 x 6 mm M3 variable inclined horn
1 x Horn 6/20 with M3 Bearing
1 x 5 mm M2 variable horn
1 x 6 mm M3 variable horn
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Brass control horn M2 long for wire (10pcs)
1 x Horn 6/27 with M3 Bearing
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Brass control horn M2 short for wire (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Brass control horn M4 long for wire (4 pcs)
2 x Cable control set
1 x Horn 6/35 with M3 Bearing
1 x Horn F3A de Titanium 16 mm (2 units)
1 x 6 mm red aluminium threaded horn with patella
1 x Cable with accesories
1 x Horn mando long (2 pcs)
2 x Horn 5/10 with M2 Bearing
1 x Horn 16,5x20 mm (2 pcs)
2 x 20 mm carbon horn
1 x Horn 5/20 with M2 Bearing
1 x Horn mando small (2 pcs)
1 x Extra long horn 60x30
1 x Horn DUBRO 1/2A
1 x Brass control horn M4 short for wire (4 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x Wing OXY 5,0 m2
1 x Rescue 1,8m2 / BackPack
1 x Parachute BACKUP X100
1 x Set cintas unión paracaídas 145 cm
1 x LUCAS pilot ARTF
1 x Aramid 50 daN 50 m
1 x Trike XL motor set (motor+esc+prop)
1 x Paramotor Trike XL
1 x Paramotor BackPack XXS 2
1 x Parachute PV6 for F3J
2 x Motor DLE 170 M- Paramotors
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x M3 black washers (4 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Round Rod 6,0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
2 x ABS Strip 1.0x3.0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x 30 cm BEC cable (female)
1 x 
1 x Horn with ball 40x30
1 x Rudder forward 70x28 "type Kato"
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x 
1 x M3 Maxi ball link (2 uds)
1 x 5 mm M2 variable inclined horn
1 x Bidule 111 3000 mm
1 x 58 mm micro servo cover
1 x 65 mm mini servo cover
1 x 20 mm tail wheel for 0,5-1 Kg models
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x Albatros red/white (Top Model)
1 x 18 mm wing servo holder
1 x BULLIT Wing 1095 mm
1 x 13 mm wing servo holder
1 x ARTIST 1.560 mm
1 x 7 mm gas motor standoff
1 x VTX 477 Carbon Rotorblade
2 x Horn 20x28,5 mm (2 pcs)
1 x Swashplate metal LAMA
1 x Micro control horn T2 Ø 1
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
8,846.10EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies