119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Double conector with JR adapter and 200 mm extension
1 x BEC 3A FOXY
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x UBEC 6A KAVAN
2 x Connector Sub-D 2+5 Female
1 x 30 cm BEC cable (female)
1 x Dean "T" - Futaba Adapter
2 x Connector Sub-D 2+5 Male
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x Cabling for Fox MDM1 wings
1 x CC 02
1 x CC 03
1 x CC 05
1 x CM-3
1 x Connector CAN 15
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Circlick securite
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 4 LiPo XH>EH adapter
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Cabel charger transmitter GRAUPNER
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 30 cm BEC cable (male)
1 x 2 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Stickers-digit for marking
1 x FX three-position switched channel, long
1 x Micro Switch button
1 x Three-position switched channel, short
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x EWC3 40 cm wing connector
1 x Female connector for 12 pines AWG
1 x EWC6 40 cm wing connector
1 x Hacker X-Pro USB interface V2
1 x Female connector for 20 pines AWG
1 x SPARK Switch 12v
1 x JETImodel Addcap 1640
1 x Male connector for 10 pines AWG
1 x EWC3 100 cm wing connector
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Horn 5/15 with M2 Bearing
1 x Horn 5/20 with M2 Bearing
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Cable control set
1 x Horn 13,5x16 mm (2 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x Motor DLE 200cc Std
1 x Extension 6 lipos XH > EH
1 x Opto Gas Engine Kill Switch
1 x Extension 5 lipos JST/C
1 x Electronic switch JETI SP06 Opto
1 x PowerBox SparkSwitch RS
1 x SPS 70V 140/280 A
1 x Magnetic Interruptor MULTIPLEX
1 x SWTU2 switch
1 x Electronic switch JETI SP6 0-15v/6A
1 x Extension 2/3 lipos JST - JST/C
1 x SBEC Jeti
1 x MAX BEC
1 x Servo slow down unit (0,7-14,7 sec )
1 x Opto Gas Engine Kill Switch
1 x SBEC 40
1 x PSC 5
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Silent-blocks DLE 170M
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x MAX BEC 2
1 x Male/Female prolonguer for Balancer Thunder Power 6S
2 x PSC 6
1 x SPS 70V 100/200 A
1 x Male Prolonger TP 4/5S
1 x Small Crow DLE-170M
1 x Extension 5 lipos JST - JST/C
1 x Silicone red 0,25 mm² wire (25 m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Circlick securite
1 x Smoke set "Glider"
1 x 2 mm male connector (2 pcs) with safety connector
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x DPS Switch JR/JR
1 x ABS tube 12.0x10.0x1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
5,541.40EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies