119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Servo NARO Max Std
1 x Crimping tool
1 x Turbina KINGTECH K320 G5
2 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Extension MPX-MPX 20 cm
2 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Adaptadores carga 6s JST-XH
1 x Big-Malibu XL Roof box with surfboard rack GREY
2 x 
1 x Extension 100 cm (Futaba)
1 x ABS Strip 1.5x6.0x1000 mm
1 x Futaba male 40 cm extension
1 x Extension silicon 10 cm (Futaba)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Switch Cap L (Blue)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo
1 x Pilot "Goose" (Slimline)
1 x Switch Cap L (silver)
1 x 1/12 Pilot "Fighter"
1 x Emisora JETI Duplex DS-16 II Carbon Line RED
1 x Switch Cap M (black)
1 x Brass control horn M2 long for wire (10pcs)
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod
1 x Glases Innovation Plus
1 x Clip fixing for wing (2 pcs)
1 x 140 mm rods set for direction control
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2
1 x Tube Pitot to PIXHAWK
1 x CM-3
1 x Pilot "Duke" Legends Series (Slimline)
1 x JETI handheld transmitter DS-14 II Red Multimode
1 x Brass control horn M2 large for wire (2pcs)
1 x Propeller APC 14x8.5 Electric Pusher
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Dean "T" - Futaba Adapter
1 x Switch Cap L (Red)
1 x Switch Cap M (silver)
1 x 6 mm aluminium horn with patella
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Piloto Jet "Green" 1/6 Scale
1 x Transmitter JETI Duplex DC-24 EX Carbon Line Multimode
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Decorative caps, multicoloured
1 x 3 LiPo XH>EH adapter
1 x 1/6 Pilot "Tony"
1 x 1/6 Pilot "Cindy"
1 x 6 mm red aluminium threaded horn with patella
1 x 1/6 Pilot "John"
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x PPM Encoder Module
1 x 2 LiPo XH>EH adapter
1 x Horn 5/15 with M2 Bearing
1 x 250 mm / 16 mm Airbrakes
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x JETI transmitter DC-14 II Red Multimode
1 x SWTU2 switch
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Transmitter JETI Duplex DS-12 EX Multimod YELLOW
1 x Cap closure 33/23.5mm (2 uds)
1 x Adjustable brass horn threaded M3
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Multimode
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x JETI transmitter DC-14 II Blue Multimode
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x 6 mm M3 variable inclined horn
1 x Horn 16,5x20 mm (2 pcs)
1 x Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x Horn 6/20 with M3 Bearing
1 x Tx JETI Duplex DC-24 II Carbon Line Ruby
1 x Adap/Exten for Futaba 12-14C
1 x DPSI magnetic switch actuator (housing)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
27,436.07EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies