119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x CC 02
1 x 30 cm BEC cable (male)
2 x CM-3
2 x CC 05
1 x Cabel charger transmitter GRAUPNER
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CC 03
2 x Double conector with JR adapter and 200 mm extension
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 4 LiPo XH>EH adapter
1 x Cabling for Fox MDM1 wings
1 x 2 LiPo XH>EH adapter
1 x Connector CAN 15
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Connector Sub-D 2+5 Male
2 x CC 01
1 x Connector Sub-D 2+5 Female
2 x Circlick securite
2 x 5 LiPo XH>EH adapter
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x DPS Switch JR/JR
2 x 3 LiPo XH>EH adapter
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x BEC 3A FOXY
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 1/6 Pilot "Tony"
1 x Pilot "Goose" (Slimline)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Piloto Jet "Red" 1/6 Scale
1 x Pilot JAN 1/4 Saiplanes
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Piloto jet 130 mm
1 x 1/6 Pilot "Buddy"
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Stickers-digit for marking
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Ferrita 17x10x6.5 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x PPM Encoder Module
1 x BALSA trip 3.0x3.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x SBEC 30 D
1 x Extension 5 lipos JST/C
1 x Prolonguer for Balancer Thunder Power 6S
1 x SWTU2 switch
1 x SPS Remote switch actuator
1 x MAX BEC 2
1 x Multi-adapter balancer JST - TP
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Interruptor RX/Batterie
1 x Interruptor SPS 70v 60/120A
2 x DPSI magnetic switch actuator (housing)
1 x Male Prolonger TP 4/5S
1 x Extension 5 lipos JST - JST/C
1 x MAX BEC 2D plus EX
1 x Oratex Natural White 20m
1 x MYLAR film A350 (1000x500 mm)
1 x Adapter lead MPX/EC3
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Oracover Red 2 m
1 x Adapter lead MPX/XT60
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Oracover Brown 2 m
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Oracover Azul Cielo 2 m
1 x Oracover Yellow CUB 2 m
2,679.37EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies