119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Marker ties (20 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Tape GFK 38 mm
1 x Aluminium cap bolt washer M4 green (8 pcs)
2 x SE Ring 240 mm (2 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Quicklock washer 3 mm (10 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x 
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x 20x200 mm battery rings
1 x M3 black washers (4 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Cinta Goldfix 1m
2 x Spring lock washer 3.1 mm (20 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
2 x Foil for sticking flaps and ailerons
1 x Aluminium cap bolt washer M4 red (8 pcs)
2 x Circlik for shaft 1.5 mm (10 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Tape GFK 50 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x CC 01
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x BEC 3A FOXY
1 x JETImodel SINGLE BEC
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x APM2.6 Power module with 5.3V DC BEC
1 x Adapter lead MPX/XT60
1 x 2 LiPo XH>EH adapter
1 x 30 cm BEC cable (female)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Oracover White 2 m
1 x ORACOVER Ferrari red (2 m)
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Oratex Antik 2m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oratex White 2m
1 x ORACOVER transparent Yellow (10 m)
1 x Propeller POWER-PROP 13x9 Izda
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Propeller APC 14x8.5 Electric Pusher
1 x Oracover Yellow CADMIO 2 m
1 x ORACOVER Fluor red (2 m)
1 x Oracover CARBON Metalic 1 m
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Oracover Azul Cielo 2 m
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Oratex Silver 2m
1 x LASER 73" 1.85m (05) PILOT
1 x Ply-Span 450x600/13g Yellow
1 x Oracover CHROME 2m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Hardener Aero EPH 161 (500 g)
1 x MPX Sub-D Adaptor
1 x 1/6 Pilot "John"
1 x Wing OXY 5,0 m2
1 x DYNAMOMETER S-1580
1 x SERVO HOLDER
1 x Micro flex hinge (12 uds)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Support Pitot JETI
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Lock nut aluminium M2.5 (4 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Lock nut M5 (20 pcs)
2 x SE Ring 300 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Blades 330mm
1 x 3 LiPo XH>EH adapter
1 x Connector Sub-D 2+5 Female
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Circlick securite
3,188.52EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies