119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CC 02
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cabel charger transmitter GRAUPNER
1 x 5 LiPo XH>EH adapter
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
2 x DPS Switch JR/JR
1 x CC 03
1 x CC 01
1 x 2 LiPo XH>EH adapter
1 x CM-3
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Circlick securite
1 x UBEC 6A KAVAN
2 x Connector Sub-D 2+5 Female
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 30 cm BEC cable (male)
1 x Dean "T" - Futaba Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cabling for Fox MDM1 wings
1 x EWC3 100 cm wing connector
1 x Connector CAN 15
1 x Male connector for 6 pines AWG
1 x Female connector for 12 pines AWG
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Three-position switched channel, short
1 x Double conector with JR adapter and 200 mm extension
1 x SPARK Switch 7.4v
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x DPSI Ampere battery backer
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Male connector for 16 pines AWG
1 x PWC4 wing/fuselage connector for 4 servos
1 x Male connector for 12 pines AWG
1 x SPARK Switch 12v
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x FX three-position switched channel, long
1 x Female connector for 10 pines AWG
1 x Extractor piñones 2.3/3.2 mm
1 x JETImodel Addcap 1640
1 x Female connector for 16 pines AWG
900.21EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies