Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

AXI 2820/12 CYCLONE
142.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Buy Perforated film 100 cm / 20 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS 500 x 400 x 1 mm (white)
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Buy Perforated film 100 cm / 50 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Buy Perforated film 145 cm / 50 m
1 x	Small aluminium horn gold (2pcs)
1 x	Horn 5/10 with M2 Bearing
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
3 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Jeti Black cap
1 x	Threaded coupler M2 (10 uds)
1 x	Horn 6/20 with M3 Bearing
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Z type of cable coupler Ø 1 (2 uds)
2 x	Ball link Aluminio M3 (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	SlowFlyer control horn (3 pcs)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	LH long black aluminium horn L31xH30 (2pcs)
3 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Horn with ball 55x40
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Horn 6/27 with M3 Bearing
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
2 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Cable control set
1 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Cable with accesories
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Horn with ball 40x30
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	20 mm carbon horn
1 x	Cap Hispano Aviación
1 x	Softshell Hispano Aviación
2 x	Vest clothes Hispano Aviación
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Head runner
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Blade holder center
1 x	Battery plate
1 x	Black large kwik link (10 pcs)
1 x	Head core
2 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Rotor Mast
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Head lower part
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support ECU Xicoy X-45
1 x	Tube support Ø 6mm (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	CA Glue fast 20g
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Release wax 250ml
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	CC 01

4,520.54EUR