119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Tape GFK 50 mm
1 x Ring 320 mm length (5 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 350 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring 250 mm (2 pcs)
2 x Tape GFK 38 mm
1 x SE Ring 400 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x SE Ring 450 mm (2 pcs)
1 x Spikes Band (5 m)
1 x SE Ring 330 mm (4 pcs)
1 x Foil for sticking flaps and ailerons
1 x SE Ring 200 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x CC 02
1 x 2 LiPo XH>EH adapter
1 x CM-3
1 x CC 05
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x TP/TopFuel - XH 2/3S Adapter
1 x USB HLS prog. interface
1 x BEC 3A FOXY
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 LiPo XH>EH adapter
2 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Towing hook
1 x Extractor piñones 2.3/3.2 mm
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Xplorer4 anemometro
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Hot Glue Stick GREEN
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Hot Glue Stick RED
1 x Hot Glue Stick BLACK
1 x Starter 12v (Max 180 and 30ccm)
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Digital precision scale up to 2000 g
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Baseplate servo
1 x Micro flex hinge (12 uds)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x PPM Encoder Module
1 x BALSA trip 10x10x1000 mm
1 x XH female balance (3S) connector (2 pcs)
1 x Extension 15 cm (Futaba)
1 x 6 mm blue aluminium threaded horn with patella
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Wheel 18 mm
1 x Motor ACTRO 28-4-880
1 x SC NAVY V15R
1 x Fishing boat Jule Fischkutter
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 30 cm BEC cable (female)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Xplorer3 anemometro
1 x 30 cm BEC cable (male)
1 x Extension 2/3 lipos JST - JST/C
1,686.06EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies