119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo SAVOX SA-1256 TG
2 x Savox Brushless Servo SB-2271SG
1 x Servo SAVOX SV-1270 TG
1 x SAVOX SH 0254 servo
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Starter 12v (Max 180 and 30ccm)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Screwdriver for Torx® TX8
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Digital precision scale up to 2000 g
1 x 2,5x60 mm allen screwdriver
1 x One touch canopy lock
1 x Hexagonal ball head 2.0 x 50 mm
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Copier 2x20 cm pcs
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Vacuum pump P1-N
1 x Digital scale up to 40 kg
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Covered closure or fairings
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Canopy Latch
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x Copier 5x20 cm pcs
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Hot Glue Stick BLACK
1 x Z Bender - S Type Tool
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x 1,5x50 mm allen screwdriver
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Ball Link Plier
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Ball Link Plier
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x PPM Encoder Module
1 x Cabin latch Fox MDM1 4m (pair)
1 x 
1 x Cut tube
1 x 2,0x50 mm allen screwdriver
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Tube Pitot to PIXHAWK
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Cap closure 33/23.5mm (2 uds)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Starter EM Gear Power 80
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Vacuum pump 12 CFM
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Crimping tool
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Dust collector for mould cleaning
1 x 11 mm wing servo holder
1 x 65 mm mini servo cover
1 x Servo TOPMODEL S7520 MG
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 5.0x4.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Ventus 1:4 set of instruments
1 x Horn 5/15 with M2 Bearing
1 x Horn 20x28,5 mm (2 pcs)
1 x Servo FUTABA S 9670 SV
1 x Servo SAVOX SW-1250 MG digi
1 x Servo SAVOX SH 0257 MG
1 x 1/12 Pilot "Fighter"
1 x Balsa panel 6.0x100x1000 mm
1 x Adapter lead MPX/EC3
1 x Connector CAN 15
6,178.54EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies