119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 85 cc
1 x Parachute BACKUP X100
3 x MAMBO 17
1 x BOEING 727, Retract set for Boeing 727
1 x Cap Hispano Aviación
1 x CNC cut
1 x Servo FUTABA BLS 276SV
1 x Brake controller for 28 and 36 mm Brakes
2 x Aramid 50 daN 50 m
1 x Motor A2212/13T
1 x Windsock Ozone L - 700 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
2 x 
2 x VBar NEO
2 x Cooler motor type 400
1 x Paramotor BackPack XXS 2
2 x Radial heatsink for MPJ AC25/35-xx motor
1 x LUCAS pilot ARTF
2 x Motor holder for AC 28/7
1 x Paramotor Trike XL
1 x Motor DLE 200cc Premium Muffler
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Metalic nose for PROJETI
1 x Para-RC Trike "RC-Bullix"
2 x Parachute PV6 for F3J
1 x Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole
1 x TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG
1 x Para-RC Mix
2 x Set cintas unión paracaídas 145 cm
1 x TopFuel LiPo 20C-ECO-X 5000mAh 2S MTAG
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG
1 x BOEING 727, Jet pipe for Boeing 727
1 x 
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x BOEING 727 kit
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 170 M- Paramotors
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Me-163
1 x Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller)
1 x Shirt Hispano Aviación
3 x Indoor Brushed motor kit
1 x MAX pilot ARTF
2 x Motor Typhoon 6/20
1 x Wing OXY 5,0 m2
1 x Servo FUTABA BLS 272SV
1 x Cooler motor type 300
1 x Vest clothes Hispano Aviación
3 x 
1 x Opale Rucksack
1 x BOEING 727, Electric brake 28mm + controller
1 x Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x Small Crow DLE-170M
1 x Windsock Ozone L -1200 mm
1 x Motor DLE 200cc Std
1 x 20x15 Falcon electric V2
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Propeller 12x6 Falcon electric
1 x 20x13 Falcon electric carbon prop (64g)
1 x DUPLEX R14 receiver 2,4GHz
1 x DUPLEX R7 REX receiver 2,4GHz A40
1 x Avanti S Jet, Kerosene+Smoke Tank(SebART)
1 x DUPLEX R6 receiver REX Assist
1 x Avanti S Jet , Field folding model stand (SebArt)
3 x Cooler motor type 280
1 x 50E class, Spare wing joinner (SebART)
1 x AngelS 50E White cockpit(SebART)
1 x Propeller hub EME 60cc
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x DUPLEX R10 receiver 2,4GHz
1 x DUPLEX R6G indoor receiver 2,4GHz
1 x AngelS 30E White cockpit(SebART)
1 x Avanti XS Jet , Tank for Keroseno (SebArt)
1 x Avanti S Jet , Carrying bags (SebArt)
1 x Hovercraft sailcloth
1 x Pick up EME 55/60 cc
1 x AngelS 50E YELLOW/BLACK (SebART)
1 x Piston ring EME 35cc
1 x DUPLEX R7 REX receiver 2,4GHz
1 x Avanti XS Jet , Fuselage Stand (SebArt)
1 x Avanti S 1.8m Jet White/Blue + Landing gear
1 x PT 21x13 EL Propeller 3 Blade
1 x Ventus 1:4 set of instruments
1 x BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser
1 x Pitts Mufflers EME 35 cc
1 x 50 class GLOW conversion set (SebART)
1 x Avanti XS Jet , Tricolore Canopy
1 x Motor EME 35 cc with electric starter
1 x Cylinder EME 35 cc
1 x AngelS 50E Yellow cockpit(SebART)
1 x PT 16x10 E Propeller
1 x 30E class, Spare wing joinner (SebART)
1 x DUPLEX Satellite receiver Rsat 900
1 x Pitts Mufflers EME 55/60 cc
1 x Avanti XS Jet , Carrying bags (SebArt)
1 x Avanti S Jet , Vectorial Exhaust for JetCat P-180
1 x CDI EME 55/60 cc
1 x Pitts Mufflers EME 70 cc (2 pcs)
1 x DUPLEX R7 receiver 2,4GHz
1 x Avanti S 1.8m Jet FREECE TRICOLORI
1 x AngelS 30E YELLOW/BLACK (SebART)
1 x Avanti S, Cockpit sunCover (SebART)
1 x Piñon motor autostarter 35cc
2 x Cooler motor type 150
1 x AngelS 50E White landing gear(SebART)
1 x Receiver DUPLEX R5L EX 2.4 GHz
1 x DUPLEX R7 receiver REX Assist
1 x DUPLEX 2.4EX Satellite receiver Rsat 2
1 x Motor EME 60 cc
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Motor EME 70 cc
1 x PT 21x13 EL Propeller
1 x One Way bearing for EME35 starkit with key
1 x AngelS 50E White/Green Fuselage(SebART)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Receiver DUPLEX REX 3 2.4 GHz
1 x Receiver DUPLEX R4H EX 2.4 GHz
1 x Motor EME 35 cc
1 x Receiver DUPLEX REX 3 A20 2.4 GHz
1 x DUPLEX R18 EX 2,4GHz + Rsat2
1 x Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear
1 x Nitroverdu 500 ml
1 x Partall paste 650 g
1 x 500 ml sealer (DOPE)
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Spray adhesive AEROFIX 2
1 x Spray Graphit 33
1 x Solvent Plasti Dip 1000 ml
1 x Servo TT ACE SHV 1504 MG
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Universal Colour Paste deep black 50 g
1 x Presto SF Light Filler styrene-free (420 g)
1 x Servo HITEC D951 TW
1 x Servo HITEC HS-45 HB
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo HITEC HS-5485 HB Digi
1 x Servo HS-5070 MH Hi Volt
1 x Servo HITEC HS-325 BB
1 x Servo Digital HITEC HS-5065 MG
1 x Electric Fuel pump
1 x Secraft Fuel system v2, red color
1 x JM electric Pump
1 x Rescue 1,8m2 / BackPack
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Connectors banna oro 4 mm (M/F)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Locking cable tie 3.2x142 (uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x SUS wire 3m (nylon coated)
1 x Covered closure or fairings
1 x Locking cable tie 4.6x203 (uds)
1 x Fueraborda RETRO
1 x ESC Actro-Marine 30A
1 x Motor Advance 50-6
1 x Regulador NAVY 540R
1 x Reguladro ACTROCON 60A
1 x Regulador Actro-Marine 60A
1 x Race Outboard MERCURY type A
1 x Motor ACTRO 50-2-760
1 x Motor ACTRO 35-4-1100
1 x Motor ORBIT 20-12 with coolingfan
1 x Regulador Actro-Marine 80A
1 x SC NAVY V15R
1 x Motor ACTRO 28-3-1300
1 x CC 01
1 x 5 LiPo XH>EH adapter
1 x BEC 3A FOXY
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Dust collector for mould cleaning
1 x Dean-T Plug Mold
1 x APM2.6 Power module with 5.3V DC BEC
1 x Crimping tool
1 x Turbina X132 H "Compact Version"
1 x CC 03
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Digital scale up to 40 kg
1 x Concave-Convex sandpaper file 13 mm
1 x Captador RCEXL para DA
1 x Ball Link Plier
1 x Digital precision scale up to 2000 g
1 x JETImodel Addcap 820
1 x Modulo reglaje avance V3
1 x Cabling for Fox MDM1 wings
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Digital weight, angle and balance meter BASIC
1 x Multiplex True Air Speed + Vario Sensor to M-LINK
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x DPSI magnetic switch actuator (housing)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x 2 LiPo XH>EH adapter
1 x Copier 5x20 cm pcs
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x 2,5x60 mm allen screwdriver
1 x DPSI Ampere battery backer
1 x EC-Cutter
1 x 25 mm Sandpaper file
1 x Connector Sub-D 2+5 Female
1 x Cabel charger transmitter GRAUPNER
1 x Adapter lead MPX/XT60
1 x Wingstabi 9 DR M-Link Receiver
1 x Crimping tool
1 x CC 05
1 x Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x 55% silver electrodes (2 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x CC 02
1 x Dremel 3000 130W
44,644.95EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies