119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 6 mm Quick clamp_S (10 pcs)
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Black silicone 1,0 qmm wire (50 m)
1 x Cable Cargador FUTABA
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Silicon black 2,5 qmm cable ( 25 m)
1 x 10 mm Quick clamp_L (6 pcs)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x 5 line servos wire black (1 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Cable set PREMIUM, fuselage/wing
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Red silicone 1,0 qmm wire (50 m)
1 x 25 mm reinforced hinge
2 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Miniature brass strap hinge, 1 m
2 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Micro flex hinge (12 uds)
2 x Jeti Black cap
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Small pinned hinge (12 uds)
1 x Flap hinge (6 pcs)
2 x Long pinned hinge (12 uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 18 mm reinforced hinge
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Long pinned hinge (6 uds)
1 x Gates hinge aluminium (1 pcs)
1 x Gates hinge
1 x 15 mm reinforced hinge
1 x Fast'n EZ-CA-Hinge (12 uds)
2 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Motor DLE 200cc Premium Muffler
1 x Big Crow DLE-170M
1 x Cut tube
1 x Starter 12v (Max 180 and 30ccm)
1 x Screwdriver for Hexagon 1,5mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Copier 5x20 cm pcs
1 x Hot Glue Stick GREEN
2 x 
1 x Hot Glue Stick RED
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Starter EM Gear Power 80
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Ball Link Plier
2 x 
1 x Starter Sullivan-STAR 603 DINATRON
1 x Z Bender - S Type Tool
1 x 3,0x60 mm allen screwdriver
1 x Crimping tool
1 x 2,0x50 mm allen screwdriver
1 x Crimping tool
1 x 2,5x60 mm allen screwdriver
1 x Aluminium wide washer M3 red (4 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Silicone red 4,0 qmm wire (25 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Xplorer4 anemometro
1 x ABS Strip 1.0x5.0x1000 mm
1 x 50m servo "Premium" wire (white/red/blue)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x ABS tube 9.0x8.0x1000 mm
1 x Programador FUTABA USB CIU-3
1 x Savox Brushless Servo SC-1251 MG
1 x FUTABA 20 mm servo arm with ball link
1 x "L" servo arm 65x49 mm (2 pcs)
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Green silicone 0,25 qmm wire (50 m)
1 x Robart Door Hinge (Pk2)
2 x Pin hinge 34x16 mm (10 uds)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Large flex hinge (12 uds)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x PROFI TX fastening rings
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Z Bender - S Type Tool
2 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x Check valve quick hose connector 4-4 mm
2 x EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x Electron 22 mm Fitting barb
1 x diameter silicone tube for glow
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x Deposito DUBRO 3000cc-100oz
1 x 18m Fitting barb
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Tool for entel
2 x Fresa corte diamante Ø 2.3mm (bola)
1 x 100 Newtons FEMA absorber
1 x Concave-Convex sandpaper file 13 mm
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Dust collector for mould cleaning
1 x 30 cm BEC cable (male)
1 x DPS Switch JR/JR
1 x Double conector with JR adapter and 200 mm extension
1 x CC 03
1 x CC 05
1 x Battery charging cable XT60
1 x 4 LiPo XH>EH adapter
1 x CC 01
1 x Adapter lead MPX/XT60
5,924.31EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies