119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Mini AVANTI S Jet , L.Gear Electric (SebArt)
1 x DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal
1 x DH82 Tiger Moth ARC Scale 1:2
1 x Suction funnel for carburetor 90D-M (red)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Set Legs + Wheels with brake ASPIRE
1 x Aluminium servo arm (2 uds)
1 x Autogyro Cierva C30 Spain
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
2 x 
2 x A/C quality beech plywood 498x247x2.0 mm
1 x Paramotor Trike XL
1 x Servo SAVOX SV-1270 TG
1 x Compact on-board starting system (9724)
1 x ARAMID honeycomb 1300x2600x2 mm
3 x Opale Rucksack
1 x Windsock Ozone L - 700 mm
1 x Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace)
1 x SUPER DIMONA TC-80
1 x Transmitter SPEKTRUM DX-9 (Only TX)
1 x Wheel Ø 75 mm (1 ud) Electron Retracts
1 x Big Crow DLE-170M
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Giant Scale Muffler D.A. 170 (2 pcs)
1 x Spinner plastic 63 mm Red 2Bl
1 x MXS-C (Mini) Blue
1 x TopFuel LiPo 35C-ECO-X 7500mAh 6S MTAG
1 x Aramid 50 daN 50 m
1 x TopFuel LiPo 35C-POWER-X 2400mAh 2S
1 x FESTO Filter 4 mm
1 x Paramotor BackPack XXS (without accessories)
1 x Fuel line plugs (Red)
1 x Bag connector 2 mm
1 x Parachute PV6 for F3J
1 x Wing OXY 5,0 m2
1 x Servo Controller Fibra optica
2 x VBar NEO
1 x Switch for DC: Long 3 Position
1 x Trike XL motor set (motor+esc+prop)
1 x Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x Carburetor DLE 170
1 x Support GFK propeller ple. 2Bl
1 x Motor DLE 200cc Std
1 x Small Crow DLE-170M
1 x Tyres 70 mm Xclaibur (2 pcs)
1 x Motor OS MAX 160 AX
1 x Kit repair carburator DLE-170
1 x ASW 20 5000 mm with winglets (Airwold)
1 x Boat 43 mm (5 pcs)
1 x DH82 Tiger Moth ARC Scale 1:3.3
1 x Parachute BACKUP X100
1 x Miss ULTIMATE 50E Yellow/Black
1 x FESTO connector M5 Quick 4 mm
1 x CHALLENGER Indoor
1 x Set Wingjoiner carbon ODYSSEY
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x Motor Set CHALLENGER Indoor
1 x Westland Lysander 50cc ARTF
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x 3-Blade Spinner 85 x 80 mm GFK
1 x OPUS-V / Jet-CC-BF
1 x Canopy F9F Panther (Aero-naut)
1 x ESC Ripmax QUANTUM 80A SBEC
1 x Gates hinge aluminium (1 pcs)
1 x Silent-blocks DLE 170M
1 x Q80-8M V2
1 x DC-3 Douglas (DAKOTA) 1800 mm
1 x Spray EC Red 400ml
1 x Connectors MPX female (PIN double)
2 x Connectors MPX male (PIN double)
1 x Bags de Luxe ULTIMATUM 2.0
1 x Telemetry interface ALTIS 20 cm
1 x FESTO connector M5 Quick 6 mm
1 x Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x Para-RC Trike "RC-Bullix"
1 x Quick hose connector 4-4 mm
1 x Manual Controller
2 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Motor DLE 200cc Premium Muffler
1 x CRACK YAK (Mini) 600 mm
1 x 700 ml complete glow fuel tank
1 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x Battery RX JETI LiIon RB 6200 7.2v
1 x Motor DLE 170 M- Paramotors
1 x Mini Avanti S 1.4m yellow/black
1 x Intairco CMB Super Filter - 4mm Barb
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Piston ring for DLE-20 RA
1 x LUCAS pilot ARTF
1 x DINO Glider ARC
1 x Fuel line plugs (Silver)
1 x Cylinder-piston Assembly 30cc
1 x LO 100 ARC 3.3m
1 x A/C quality beech plywood 498x247x1.2 mm
1 x PowerBox Battery 4000
1 x Intairco CMB Super Filter - 6mm Barb
1 x Rescue 1,8m2 / BackPack
1 x Propeller CFK 11x8
1 x Servo SAVOX SA-1256 TG
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x LO 100 ARC 3.3m,frame canopy
1 x Wing OXY 0,5 pulgadas2
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Adapter lead MPX/XT60
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x CC 03
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 5 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Double conector with JR adapter and 200 mm extension
1 x Captador RCEXL para DA
1 x Dean "T" - Futaba Adapter
1 x Connector CAN 15
1 x BEC 3A FOXY
1 x Connector Sub-D 2+5 Male
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CM-3
1 x Turbina X132 H "Compact Version"
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (female)
1 x 2 LiPo XH>EH adapter
37,473.09EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies